Re: [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: Add base dts file

[Konrad Dybcio]

Hi,


> +
> +	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l10a_2p96>;
> +	vcc-max-microamp = <750000>;
> +	vccq-supply = <&vreg_l5c_1p2>;
> +	vccq-max-microamp = <700000>;
> +	vccq2-supply = <&vreg_s4a_1p8>;
> +	vccq2-max-microamp = <750000>;

You need to add "regulator-allow-set-load;" to the mentioned supplies,

as you're controlling the amperage here.


> +};
> +
> +&ufs_mem_phy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vreg_l8c_1p2>;
> +	vdda-max-microamp = <87100>;
> +	vdda-pll-supply = <&vreg_l5a_0p88>;
> +	vdda-pll-max-microamp = <18300>;

Ditto


Konrad