[PATCH 11/27] arm64: dts: mt8195: add PCIe device node
From: Tinghan Shen
Date: Tue Jun 15 2021 - 13:33:06 EST
From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
Add PCIe device node for mt8195.
Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 74 ++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index dd5644410fea..539f405a4f3d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/mt8195-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/power/mt8195-power.h>
#include <dt-bindings/reset/ti-syscon.h>
@@ -944,6 +945,79 @@
status = "disabled";
};
+ pcie0: pcie@112f0000 {
+ device_type = "pci";
+ compatible = "mediatek,mt8195-pcie";
+ reg = <0 0x112f0000 0 0x2000>;
+ reg-names = "pcie-mac";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000
+ 0x0 0x20000000 0 0x4000000>;
+
+ status = "disabled";
+
+ clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+ <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+
+ phys = <&pciephy>;
+ phy-names = "pcie-phy";
+ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@112f8000 {
+ device_type = "pci";
+ compatible = "mediatek,mt8195-pcie";
+ reg = <0 0x112f8000 0 0x2000>;
+ reg-names = "pcie-mac";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x24000000
+ 0x0 0x24000000 0 0x4000000>;
+
+ status = "disabled";
+ clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_P1_TL_96M>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_P1_PERI_26M>,
+ <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+
+ phys = <&u3port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
nor_flash: nor@1132c000 {
compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
reg = <0 0x1132c000 0 0x1000>;
--
2.18.0