Re: [PATCH 25/27] arm64: dts: mt8195: add vdosys1 support for MT8195

From: Chun-Kuang Hu
Date: Tue Jun 15 2021 - 19:23:30 EST

Next message: Michal Kubecek: "Re: [net-next, v3, 05/10] ethtool: add a new command for getting PHC virtual clocks"
Previous message: Alex Williamson: "Re: [PATCH 09/11] PCI: add matching checks for driver_override binding"
In reply to: Tinghan Shen: "[PATCH 25/27] arm64: dts: mt8195: add vdosys1 support for MT8195"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi, Tinghan:

Tinghan Shen <tinghan.shen@xxxxxxxxxxxx> 於 2021年6月16日週三上午5:39寫道：
>
> From: Nancy Lin <nancy.lin@xxxxxxxxxxxx>
>
> add vdosys1 support for MT8195
>
> Signed-off-by: Nancy Lin <nancy.lin@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 178 +++++++++++++++++++++--
> 1 file changed, 169 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index e273833a49f8..a98609989905 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -26,6 +26,7 @@
> dpi1 = &disp_dpi1;
> dp-intf0 = &dp_intf0;
> dp-intf1 = &dp_intf1;
> + merge5 = &merge5;
> };
>
> clocks {
> @@ -2241,22 +2242,27 @@
>
> vdosys_config@1c01a000 {
> compatible = "mediatek,mt8195-vdosys";
> - reg = <0 0x1c01a000 0 0x1000>;
> - reg-names = "vdosys0_config";
> + reg = <0 0x1c01a000 0 0x1000>,<0 0x1c100000 0 0x1000>;
> + reg-names = "vdosys0_config","vdosys1_config";
> iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>;
> power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
> - mboxes = <&gce1 0 0 CMDQ_THR_PRIO_4>;
> + mboxes = <&gce1 0 0 CMDQ_THR_PRIO_4>,
> + <&gce1 1 0 CMDQ_THR_PRIO_4>;
> };
>
> mutex: disp_mutex0@1c016000 {
> compatible = "mediatek,mt8195-disp-mutex";
> - reg = <0 0x1c016000 0 0x1000>;
> - reg-names = "vdo0_mutex";
> - clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
> + reg = <0 0x1c016000 0 0x1000>,
> + <0 0x1c101000 0 0x1000>;
> + reg-names = "vdo0_mutex","vdo1_mutex";
> + clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>,
> + <&vdosys1 CLK_VDO1_DISP_MUTEX>;
> power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
> - clock-names = "vdo0_mutex";
> - interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
> - mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
> + clock-names = "vdo0_mutex","sub_mutex";
> + interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
> + mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>,
> + <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
> };
>
> ovl0: disp_ovl@1c000000 {
> @@ -2446,6 +2452,92 @@
> power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> };
>
> + disp_pseudo_ovl0@1c104000 {
> + compatible = "mediatek,mt8195-disp-pseudo-ovl";

Where is the definition of this compatible?

> + reg = <0 0x1c104000 0 0x1000>,
> + <0 0x1c105000 0 0x1000>,
> + <0 0x1c106000 0 0x1000>,
> + <0 0x1c107000 0 0x1000>,
> + <0 0x1c108000 0 0x1000>,
> + <0 0x1c109000 0 0x1000>,
> + <0 0x1c10A000 0 0x1000>,
> + <0 0x1c10B000 0 0x1000>,
> + <0 0x1c10C000 0 0x1000>,
> + <0 0x1c10D000 0 0x1000>,
> + <0 0x1c10E000 0 0x1000>,
> + <0 0x1c10F000 0 0x1000>,
> + <0 0x1c100000 0 0x1000>;
> + reg-names = "vdo1_mdp_rdma0","vdo1_mdp_rdma1","vdo1_mdp_rdma2",
> + "vdo1_mdp_rdma3","vdo1_mdp_rdma4",
> + "vdo1_mdp_rdma5","vdo1_mdp_rdma6",
> + "vdo1_mdp_rdma7","vdo1_merge0",
> + "vdo1_merge1","vdo1_merge2","vdo1_merge3","top";
> + mediatek,gce-client-reg = <&gce1 SUBSYS_1c10XXXX 0x4000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x5000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x6000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x7000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x8000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x9000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0xA000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0xB000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0xC000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0xD000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0xE000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0xF000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x0000 0x1000>;
> + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA1>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA2>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA3>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA4>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA5>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA6>,
> + <&vdosys1 CLK_VDO1_MDP_RDMA7>,
> + <&vdosys1 CLK_VDO1_VPP_MERGE0>,
> + <&vdosys1 CLK_VDO1_VPP_MERGE1>,
> + <&vdosys1 CLK_VDO1_VPP_MERGE2>,
> + <&vdosys1 CLK_VDO1_VPP_MERGE3>,
> + <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
> + clock-names = "vdo1_mdp_rdma0","vdo1_mdp_rdma1",
> + "vdo1_mdp_rdma2","vdo1_mdp_rdma3",
> + "vdo1_mdp_rdma4","vdo1_mdp_rdma5",
> + "vdo1_mdp_rdma6","vdo1_mdp_rdma7",
> + "vdo1_merge0","vdo1_merge1",
> + "vdo1_merge2","vdo1_merge3",
> + "vdo1_merge0_async","vdo1_merge1_async",
> + "vdo1_merge2_async","vdo1_merge3_async";
> + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> + mediatek,larb = <&larb2>;
> + mediatek,smi-id = <0>;
> + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
> + interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma0*/
> + <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma1*/
> + <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma2*/
> + <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma3*/
> + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma4*/
> + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma5*/
> + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma6*/
> + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>, /*rdma7*/
> + <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>, /*merge0*/
> + <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>, /*merge1*/
> + <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>, /*merge2*/
> + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>; /*merge3*/
> + };
> +
> + merge5: disp_vpp_merge5@1c110000 {
> + compatible = "mediatek,mt8195-disp-merge";

Ditto.

> + reg = <0 0x1c110000 0 0x1000>;
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
> + <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
> + clock-names = "merge5","merge5_async";
> + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> + mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>;
> + };
> +
> disp_dpi1: disp_dpi1@1c112000 {
> compatible = "mediatek,mt8195-dpi";
> reg = <0 0x1c112000 0 0x1000>;
> @@ -2478,6 +2570,54 @@
> status = "disabled";
> };
>
> + disp_ethdr@1c114000 {
> + compatible = "mediatek,mt8195-disp-ethdr";

Ditto.

> + reg = <0 0x1c114000 0 0x1000>,
> + <0 0x1c115000 0 0x1000>,
> + <0 0x1c117000 0 0x1000>,
> + <0 0x1c119000 0 0x1000>,
> + <0 0x1c11A000 0 0x1000>,
> + <0 0x1c11B000 0 0x1000>,
> + <0 0x1c11C000 0 0x1000>,
> + <0 0x1c100000 0 0x1000>;
> + reg-names = "hdr_disp_mixer","hdr_vdo_fe0","hdr_vdo_fe1",
> + "hdr_gfx_fe0","hdr_gfx_fe1","hdr_vdo_be",
> + "hdr_adl_ds","top";
> + mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x4000 0x1000>,
> + <&gce1 SUBSYS_1c11XXXX 0x5000 0x1000>,
> + <&gce1 SUBSYS_1c11XXXX 0x7000 0x1000>,
> + <&gce1 SUBSYS_1c11XXXX 0x9000 0x1000>,
> + <&gce1 SUBSYS_1c11XXXX 0xA000 0x1000>,
> + <&gce1 SUBSYS_1c11XXXX 0xB000 0x1000>,
> + <&gce1 SUBSYS_1c11XXXX 0xC000 0x1000>,
> + <&gce1 SUBSYS_1c10XXXX 0x0000 0x1000>;
> + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
> + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
> + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
> + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
> + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
> + <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
> + <&vdosys1 CLK_VDO1_26M_SLOW>,
> + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
> + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
> + <&topckgen CLK_TOP_ETHDR_SEL>;
> + clock-names = "hdr_disp_mixer","hdr_vdo_fe0","hdr_vdo_fe1",
> + "hdr_gfx_fe0","hdr_gfx_fe1","hdr_vdo_be",
> + "hdr_adl_ds","hdr_vdo_fe0_async",
> + "hdr_vdo_fe1_async","hdr_gfx_fe0_async",
> + "hdr_gfx_fe1_async","hdr_vdo_be_async",
> + "ethdr_top";
> + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> + mediatek,larb = <&larb3>;
> + mediatek,smi-id = <1>;
> + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
> + <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
> + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /*disp mixer*/
> + };
> +
> hdmi0: hdmi@1c300000 {
> compatible = "mediatek,mt8195-hdmi";
> reg = <0 0x1c300000 0 0x1000>;
> @@ -2517,6 +2657,26 @@
> };
> };
>
> + disp_pseudo_ovl_l2 {
> + compatible = "mediatek,mt8195-pseudo-ovl-larb";

Ditto.

> + mediatek,larb-id = <2>;
> + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>,
> + <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>,
> + <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>,
> + <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
> + };
> +
> + disp_pseudo_ovl_l3 {
> + compatible = "mediatek,mt8195-pseudo-ovl-larb";

Ditto.

Regards,
Chun-Kuang.

> + mediatek,larb-id = <3>;
> + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>,
> + <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>,
> + <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>,
> + <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
> + };
> +
> hdmiddc0: ddc_i2c {
> compatible = "mediatek,mt8195-hdmi-ddc";
> clocks = <&clk26m>;
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Next message: Michal Kubecek: "Re: [net-next, v3, 05/10] ethtool: add a new command for getting PHC virtual clocks"
Previous message: Alex Williamson: "Re: [PATCH 09/11] PCI: add matching checks for driver_override binding"
In reply to: Tinghan Shen: "[PATCH 25/27] arm64: dts: mt8195: add vdosys1 support for MT8195"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]