Re: [PATCH v2 3/3] arm64: dts: qcom: Add support for SONY Xperia 1 II / 5 II (Edo platform)

From: Bjorn Andersson
Date: Tue Jun 15 2021 - 19:45:57 EST


On Sat 12 Jun 14:23 CDT 2021, Konrad Dybcio wrote:

> Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two).
> They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There
> also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500
> and no developers have obtained it so far (to my knowledge).
>
> The devices are affected by a scary UFS behaviour where sending a certain UFS
> command (which is worked around on downstream) renders the device unbootable,
> by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
> disabled for now.
>

Ouch, that's expensive paper weights. Let's hope someone can shed some
light on the UFS situation.


The rest looks really nice!

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Thanks,
Bjorn

> Downstream workaround:
> https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561
>
> Tested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> ---
> Changes since v1:
> - Separate the sdhci2 pinctrl part
> - Fix up some regulator settings and comments
> - Add Marijn's t-b
>
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../qcom/sm8250-sony-xperia-edo-pdx203.dts | 15 +
> .../qcom/sm8250-sony-xperia-edo-pdx206.dts | 24 +
> .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 494 ++++++++++++++++++
> 4 files changed, 535 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 456502aeee49..a3b832d9fc0c 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -73,5 +73,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
> new file mode 100644
> index 000000000000..79afeb07f4a2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm8250-sony-xperia-edo.dtsi"
> +
> +/ {
> + model = "Sony Xperia 1 II";
> + compatible = "sony,pdx203-generic", "qcom,sm8250";
> +};
> +
> +/delete-node/ &vreg_l7f_1p8;
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
> new file mode 100644
> index 000000000000..999b662f4679
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm8250-sony-xperia-edo.dtsi"
> +
> +/ {
> + model = "Sony Xperia 5 II";
> + compatible = "sony,pdx206-generic", "qcom,sm8250";
> +};
> +
> +&framebuffer {
> + width = <1080>;
> + height = <2520>;
> + stride = <(1080 * 4)>;
> +};
> +
> +&vreg_l2f_1p3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> new file mode 100644
> index 000000000000..df251b51b106
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -0,0 +1,494 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sm8250.dtsi"
> +#include "pm8150.dtsi"
> +#include "pm8150b.dtsi"
> +#include "pm8150l.dtsi"
> +#include "pm8009.dtsi"
> +
> +/delete-node/ &adsp_mem;
> +/delete-node/ &spss_mem;
> +/delete-node/ &cdsp_secure_heap;
> +
> +/ {
> + qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
> + qcom,board-id = <0x10008 0>;
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer: framebuffer@9c000000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x9c000000 0 0x2300000>;
> + width = <1644>;
> + height = <3840>;
> + stride = <(1644 * 4)>;
> + format = "a8r8g8b8";
> + /*
> + * That's a lot of clocks, but it's necessary due
> + * to unused clk cleanup & no panel driver yet..
> + */
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&gcc GCC_DISP_SF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>;
> + power-domains = <&dispcc MDSS_GDSC>;
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
> + vreg_s6c_0p88: smpc6-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_s6c_0p88";
> +
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-always-on;
> + vin-supply = <&vph_pwr>;
> + };
> +
> + reserved-memory {
> + adsp_mem: memory@8a100000 {
> + reg = <0x0 0x8a100000 0x0 0x2500000>;
> + no-map;
> + };
> +
> + spss_mem: memory@8c600000 {
> + reg = <0x0 0x8c600000 0x0 0x100000>;
> + no-map;
> + };
> +
> + cdsp_secure_heap: memory@8c700000 {
> + reg = <0x0 0x8c700000 0x0 0x4600000>;
> + no-map;
> + };
> +
> + cont_splash_mem: memory@9c000000 {
> + reg = <0x0 0x9c000000 0x0 0x2300000>;
> + no-map;
> + };
> +
> + ramoops@ffc00000 {
> + compatible = "ramoops";
> + reg = <0x0 0xffc00000 0x0 0x100000>;
> + record-size = <0x1000>;
> + console-size = <0x40000>;
> + msg-size = <0x20000 0x20000>;
> + ecc-size = <16>;
> + no-map;
> + };
> + };
> +};
> +
> +&apps_rsc {
> + pm8150-rpmh-regulators {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
> + vdd-l2-l10-supply = <&vreg_bob>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
> + vdd-l6-l9-supply = <&vreg_s8c_1p2>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
> + vdd-l13-l16-l17-supply = <&vreg_bob>;
> +
> + /* (S1+S2+S3) - cx.lvl (ARC) */
> +
> + vreg_s4a_1p8: smps4 {
> + regulator-name = "vreg_s4a_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5a_1p9: smps5 {
> + regulator-name = "vreg_s5a_1p9";
> + regulator-min-microvolt = <1824000>;
> + regulator-max-microvolt = <2040000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s6a_0p6: smps6 {
> + regulator-name = "vreg_s6a_0p6";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1128000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2a_3p1: ldo2 {
> + regulator-name = "vreg_l2a_3p1";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3a_0p9: ldo3 {
> + regulator-name = "vreg_l3a_0p9";
> + regulator-min-microvolt = <928000>;
> + regulator-max-microvolt = <932000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L4 - lmx.lvl (ARC) */
> +
> + vreg_l5a_0p88: ldo5 {
> + regulator-name = "vreg_l5a_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6a_1p2: ldo6 {
> + regulator-name = "vreg_l6a_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L7 is unused. */
> +
> + vreg_l9a_1p2: ldo9 {
> + regulator-name = "vreg_l9a_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L10 is unused, L11 - lcx.lvl (ARC) */
> +
> + vreg_l12a_1p8: ldo12 {
> + regulator-name = "vreg_l12a_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L13 is unused. */
> +
> + vreg_l14a_1p8: ldo14 {
> + regulator-name = "vreg_l14a_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L15 & L16 are unused. */
> +
> + vreg_l17a_3p0: ldo17 {
> + regulator-name = "vreg_l17a_3p0";
> + regulator-min-microvolt = <2496000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l18a_0p9: ldo18 {
> + regulator-name = "vreg_l18a_0p9";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + /*
> + * Remaining regulators that are not yet supported:
> + * OLEDB: 4925000-8100000
> + * ab: 4600000-6100000
> + * ibb: 800000-5400000
> + */
> + pm8150l-rpmh-regulators {
> + compatible = "qcom,pm8150l-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-l1-l8-supply = <&vreg_s4a_1p8>;
> + vdd-l2-l3-supply = <&vreg_s8c_1p2>;
> + vdd-l4-l5-l6-supply = <&vreg_bob>;
> + vdd-l7-l11-supply = <&vreg_bob>;
> + vdd-l9-l10-supply = <&vreg_bob>;
> + vdd-bob-supply = <&vph_pwr>;
> +
> + vreg_bob: bob {
> + regulator-name = "vreg_bob";
> + regulator-min-microvolt = <3350000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> + };
> +
> + /*
> + * S1-S6 are ARCs:
> + * (S1+S2) - gfx.lvl,
> + * S3 - mx.lvl,
> + * (S4+S5) - mmcx.lvl,
> + * S6 - ebi.lvl
> + */
> +
> + vreg_s7c_0p35: smps7 {
> + regulator-name = "vreg_s7c_0p35";
> + regulator-min-microvolt = <348000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s8c_1p2: smps8 {
> + regulator-name = "vreg_s8c_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1c_1p8: ldo1 {
> + regulator-name = "vreg_l1c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L2-4 are unused. */
> +
> + vreg_l5c_1p8: ldo5 {
> + regulator-name = "vreg_l5c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6c_2p9: ldo6 {
> + regulator-name = "vreg_l6c_2p9";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l7c_2p85: ldo7 {
> + regulator-name = "vreg_l7c_2p85";
> + regulator-min-microvolt = <2856000>;
> + regulator-max-microvolt = <3104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8c_1p8: ldo8 {
> + regulator-name = "vreg_l8c_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9c_2p9: ldo9 {
> + regulator-name = "vreg_l9c_2p9";
> + regulator-min-microvolt = <2704000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l10c_3p3: ldo10 {
> + regulator-name = "vreg_l10c_3p3";
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3296000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_3p0: ldo11 {
> + regulator-name = "vreg_l11c_3p0";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + pm8009-rpmh-regulators {
> + compatible = "qcom,pm8009-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vreg_bob>;
> + vdd-l2-supply = <&vreg_s8c_1p2>;
> + vdd-l5-l6-supply = <&vreg_bob>;
> + vdd-l7-supply = <&vreg_s4a_1p8>;
> +
> + vreg_s1f_1p2: smps1 {
> + regulator-name = "vreg_s1f_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s2f_0p5: smps2 {
> + regulator-name = "vreg_s2f_0p5";
> + regulator-min-microvolt = <512000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L1 is unused. */
> +
> + vreg_l2f_1p3: ldo2 {
> + regulator-name = "vreg_l2f_1p3";
> + regulator-min-microvolt = <1304000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L3 & L4 are unused. */
> +
> + vreg_l5f_2p8: ldo5 {
> + regulator-name = "vreg_l5f_2p85";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6f_2p8: ldo6 {
> + regulator-name = "vreg_l6f_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7f_1p8: ldo7 {
> + regulator-name = "vreg_l7f_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + /* NXP PN553 NFC @ 28 */
> +};
> +
> +&i2c2 {
> + status = "okay";
> + clock-frequency = <1000000>;
> +
> + /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */
> +};
> +
> +&i2c5 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + /* Dialog SLG51000 CMIC @ 75 */
> +};
> +
> +&i2c9 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + /* AMS TCS3490 RGB+IR color sensor @ 72 */
> +};
> +
> +&i2c13 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + /* Samsung touchscreen @ 48 */
> +};
> +
> +&i2c15 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + /* Qcom SMB1390 @ 10 */
> + /* Silicon Labs SI4704 FM Radio Receiver @ 11 */
> + /* Qcom SMB1390_slave @ 18 */
> + /* HALO HL6111R Qi charger @ 25 */
> + /* Richwave RTC6226 FM Radio Receiver @ 64 */
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&qupv3_id_2 {
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + status = "okay";
> +
> + vmmc-supply = <&vreg_l9c_2p9>;
> + vqmmc-supply = <&vreg_l6c_2p9>;
> + bus-width = <4>;
> + no-sdio;
> + no-emmc;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <40 4>, <52 4>;
> +};
> +
> +&uart12 {
> + status = "okay";
> +};
> +
> +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
> +&ufs_mem_hc { status = "disabled"; };
> +&ufs_mem_phy { status = "disabled"; };
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l5a_0p88>;
> + vdda18-supply = <&vreg_l12a_1p8>;
> + vdda33-supply = <&vreg_l2a_3p1>;
> +};
> +
> +&usb_1_qmpphy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l9a_1p2>;
> + vdda-pll-supply = <&vreg_l18a_0p9>;
> +};
> --
> 2.32.0
>