Re: [PATCH] arm64: dts: qcom: sm8250: Add DMA to I2C/SPI

From: Bjorn Andersson
Date: Tue Jun 15 2021 - 19:51:50 EST

Next message: Mat Martineau: "Re: [PATCH] mptcp: Remove redundant assignment to remaining"
Previous message: Konrad Dybcio: "Re: [PATCH v2 3/3] arm64: dts: qcom: Add support for SONY Xperia 1 II / 5 II (Edo platform)"
In reply to: Konrad Dybcio: "[PATCH] arm64: dts: qcom: sm8250: Add DMA to I2C/SPI"
Next in thread: Vinod Koul: "Re: [PATCH] arm64: dts: qcom: sm8250: Add DMA to I2C/SPI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue 15 Jun 09:22 CDT 2021, Konrad Dybcio wrote:

> Add dma properties to I2C and SPI nodes to make sure DMA transfers can go
> through. While at it, fix up the property order in SPI nodes to make #address-
> and #size-cells go after all the meaningful properties.
>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

But I'll have to wait until Vinod has merged the compatible addition in
the driver - or given me an Ack to include the pair here.

Thanks,
Bjorn

> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> ---
> Depends on this GPI DMA series:
> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=500245
>
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 200 +++++++++++++++++++++------
> 1 file changed, 160 insertions(+), 40 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 806973d6ba55..1e8ad0017f58 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -561,6 +561,9 @@ i2c14: i2c@880000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c14_default>;
> interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -572,10 +575,13 @@ spi14: spi@880000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -587,6 +593,9 @@ i2c15: i2c@884000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c15_default>;
> interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -598,10 +607,13 @@ spi15: spi@884000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -613,6 +625,9 @@ i2c16: i2c@888000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c16_default>;
> interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -624,10 +639,13 @@ spi16: spi@888000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -639,6 +657,9 @@ i2c17: i2c@88c000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c17_default>;
> interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -650,10 +671,13 @@ spi17: spi@88c000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -678,6 +702,9 @@ i2c18: i2c@890000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c18_default>;
> interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -689,10 +716,13 @@ spi18: spi@890000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -717,6 +747,9 @@ i2c19: i2c@894000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c19_default>;
> interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 5 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -728,10 +761,13 @@ spi19: spi@894000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 5 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
> };
> @@ -779,6 +815,9 @@ i2c0: i2c@980000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c0_default>;
> interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -790,10 +829,13 @@ spi0: spi@980000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -805,6 +847,9 @@ i2c1: i2c@984000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c1_default>;
> interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -816,10 +861,13 @@ spi1: spi@984000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -831,6 +879,9 @@ i2c2: i2c@988000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c2_default>;
> interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -842,10 +893,13 @@ spi2: spi@988000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -870,6 +924,9 @@ i2c3: i2c@98c000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c3_default>;
> interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -881,10 +938,13 @@ spi3: spi@98c000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -896,6 +956,9 @@ i2c4: i2c@990000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c4_default>;
> interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -907,10 +970,13 @@ spi4: spi@990000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -922,6 +988,9 @@ i2c5: i2c@994000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c5_default>;
> interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 5 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -933,10 +1002,13 @@ spi5: spi@994000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 5 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -948,6 +1020,9 @@ i2c6: i2c@998000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c6_default>;
> interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 6 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -959,10 +1034,13 @@ spi6: spi@998000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 6 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -987,6 +1065,9 @@ i2c7: i2c@99c000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c7_default>;
> interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 7 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -998,10 +1079,13 @@ spi7: spi@99c000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 7 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
> };
> @@ -1046,6 +1130,9 @@ i2c8: i2c@a80000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c8_default>;
> interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1057,10 +1144,13 @@ spi8: spi@a80000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -1072,6 +1162,9 @@ i2c9: i2c@a84000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c9_default>;
> interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1083,10 +1176,13 @@ spi9: spi@a84000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -1098,6 +1194,9 @@ i2c10: i2c@a88000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c10_default>;
> interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1109,10 +1208,13 @@ spi10: spi@a88000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -1124,6 +1226,9 @@ i2c11: i2c@a8c000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c11_default>;
> interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1135,10 +1240,13 @@ spi11: spi@a8c000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -1150,6 +1258,9 @@ i2c12: i2c@a90000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c12_default>;
> interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1161,10 +1272,13 @@ spi12: spi@a90000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> @@ -1189,6 +1303,9 @@ i2c13: i2c@a94000 {
> pinctrl-names = "default";
> pinctrl-0 = <&qup_i2c13_default>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 5 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1200,10 +1317,13 @@ spi13: spi@a94000 {
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 5 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> power-domains = <&rpmhpd SM8250_CX>;
> operating-points-v2 = <&qup_opp_table>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
> };
> --
> 2.32.0
>

Next message: Mat Martineau: "Re: [PATCH] mptcp: Remove redundant assignment to remaining"
Previous message: Konrad Dybcio: "Re: [PATCH v2 3/3] arm64: dts: qcom: Add support for SONY Xperia 1 II / 5 II (Edo platform)"
In reply to: Konrad Dybcio: "[PATCH] arm64: dts: qcom: sm8250: Add DMA to I2C/SPI"
Next in thread: Vinod Koul: "Re: [PATCH] arm64: dts: qcom: sm8250: Add DMA to I2C/SPI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]