[PATCH v5 2/3] pwm: mtk_disp: implement atomic API .apply()
From: Jitao Shi
Date: Wed Jun 16 2021 - 04:54:26 EST
Switch the driver to support the .apply() method.
Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
---
drivers/pwm/pwm-mtk-disp.c | 69 ++++++++++----------------------------
1 file changed, 17 insertions(+), 52 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 204d76beeb26..a4766e931b68 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -67,14 +67,25 @@ static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
writel(value, address);
}
-static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u32 clk_div, period, high_width, value;
u64 div, rate;
int err;
+ if (!state->enabled) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+ 0x0);
+ if (mdp->enabled) {
+ clk_disable_unprepare(mdp->clk_mm);
+ clk_disable_unprepare(mdp->clk_main);
+ }
+ mdp->enabled = false;
+ return 0;
+ }
+
if (!mdp->enabled) {
err = clk_prepare_enable(mdp->clk_main);
if (err < 0) {
@@ -102,7 +113,7 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
*/
rate = clk_get_rate(mdp->clk_main);
- clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+ clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
PWM_PERIOD_BIT_WIDTH;
if (clk_div > PWM_CLKDIV_MAX) {
if (!mdp->enabled) {
@@ -112,11 +123,11 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return -EINVAL;
}
div = NSEC_PER_SEC * (clk_div + 1);
- period = div64_u64(rate * period_ns, div);
+ period = div64_u64(rate * state->period, div);
if (period > 0)
period--;
- high_width = div64_u64(rate * duty_ns, div);
+ high_width = div64_u64(rate * state->duty_cycle, div);
value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
@@ -141,36 +152,6 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
mdp->data->con0_sel,
mdp->data->con0_sel);
}
-
- if (!mdp->enabled) {
- clk_disable_unprepare(mdp->clk_mm);
- clk_disable_unprepare(mdp->clk_main);
- }
-
- return 0;
-}
-
-static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- int err;
-
- if (!mdp->enabled) {
- err = clk_prepare_enable(mdp->clk_main);
- if (err < 0) {
- dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n",
- ERR_PTR(err));
- return err;
- }
- err = clk_prepare_enable(mdp->clk_mm);
- if (err < 0) {
- dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n",
- ERR_PTR(err));
- clk_disable_unprepare(mdp->clk_main);
- return err;
- }
- }
-
mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
mdp->data->enable_mask);
mdp->enabled = true;
@@ -178,24 +159,8 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return 0;
}
-static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
-
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
- 0x0);
-
- if (mdp->enabled) {
- clk_disable_unprepare(mdp->clk_mm);
- clk_disable_unprepare(mdp->clk_main);
- }
- mdp->enabled = false;
-}
-
static const struct pwm_ops mtk_disp_pwm_ops = {
- .config = mtk_disp_pwm_config,
- .enable = mtk_disp_pwm_enable,
- .disable = mtk_disp_pwm_disable,
+ .apply = mtk_disp_pwm_apply,
.owner = THIS_MODULE,
};
--
2.25.1