Re: [PATCH net-next 3/3] net: wwan: Allow WWAN drivers to provide blocking tx and poll function

From: Loic Poulain
Date: Wed Jun 16 2021 - 05:19:50 EST

Next message: Shaik Sajida Bhanu: "[PATCH V2] dt-bindings: mmc: sdhci-msm: Add compatible string for sc7280"
Previous message: David Howells: "Re: [PATCH v11 01/33] mm: Convert get_page_unless_zero() to return bool"
Next in thread: Stephan Gerhold: "Re: [PATCH net-next 3/3] net: wwan: Allow WWAN drivers to provide blocking tx and poll function"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 16 Jun 2021 at 00:06, Stephan Gerhold <stephan@xxxxxxxxxxx> wrote:
>
> On Tue, Jun 15, 2021 at 11:24:41PM +0200, Loic Poulain wrote:
> > On Tue, 15 Jun 2021 at 15:34, Stephan Gerhold <stephan@xxxxxxxxxxx> wrote:
> > >
> > > At the moment, the WWAN core provides wwan_port_txon/off() to implement
> > > blocking writes. The tx() port operation should not block, instead
> > > wwan_port_txon/off() should be called when the TX queue is full or has
> > > free space again.
> > >
> > > However, in some cases it is not straightforward to make use of that
> > > functionality. For example, the RPMSG API used by rpmsg_wwan_ctrl.c
> > > does not provide any way to be notified when the TX queue has space
> > > again. Instead, it only provides the following operations:
> > >
> > > - rpmsg_send(): blocking write (wait until there is space)
> > > - rpmsg_trysend(): non-blocking write (return error if no space)
> > > - rpmsg_poll(): set poll flags depending on TX queue state
> > >
> > > Generally that's totally sufficient for implementing a char device,
> > > but it does not fit well to the currently provided WWAN port ops.
> > >
> > > Most of the time, using the non-blocking rpmsg_trysend() in the
> > > WWAN tx() port operation works just fine. However, with high-frequent
> > > writes to the char device it is possible to trigger a situation
> > > where this causes issues. For example, consider the following
> > > (somewhat unrealistic) example:
> > >
> > > # dd if=/dev/zero bs=1000 of=/dev/wwan0p2QMI
> > > dd: error writing '/dev/wwan0p2QMI': Resource temporarily unavailable
> > > 1+0 records out
> > >
> > > This fails immediately after writing the first record. It's likely
> > > only a matter of time until this triggers issues for some real application
> > > (e.g. ModemManager sending a lot of large QMI packets).
> > >
> > > The rpmsg_char device does not have this problem, because it uses
> > > rpmsg_trysend() and rpmsg_poll() to support non-blocking operations.
> > > Make it possible to use the same in the RPMSG WWAN driver by extending
> > > the tx() operation with a "nonblock" parameter and adding an optional
> > > poll() callback. This integrates nicely with the RPMSG API and does
> > > not break other WWAN drivers.
> > >
> > > With these changes, the dd example above blocks instead of exiting
> > > with an error.
> > >
> > > Cc: Loic Poulain <loic.poulain@xxxxxxxxxx>
> > > Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> > > ---
> > > Note that rpmsg_poll() is an optional callback currently only implemented
> > > by the qcom_smd RPMSG provider. However, it should be easy to implement
> > > this for other RPMSG providers when needed.
> > >
> > > Another potential solution suggested by Loic Poulain in [1] is to always
> > > use the blocking rpmsg_send() from a workqueue/kthread and disable TX
> > > until it is done. I think this could also work (perhaps a bit more
> > > difficult to implement) but the main disadvantage is that I don't see
> > > a way to return any kind of error to the client with this approach.
> > > I assume we return immediately from the write() to the char device
> > > after scheduling the rpmsg_send(), so we already reported success
> > > when rpmsg_send() returns.
> > >
> > > At the end all that matters to me is that it works properly, so I'm
> > > open for any other suggestions. :)
> > >
> > > [1]: https://lore.kernel.org/linux-arm-msm/CAMZdPi_-Qa=JnThHs_h-144dAfSAjF5s+QdBawdXZ3kk8Mx8ng@xxxxxxxxxxxxxx/
> > > ---
> > > drivers/net/wwan/iosm/iosm_ipc_port.c | 3 ++-
> > > drivers/net/wwan/mhi_wwan_ctrl.c | 3 ++-
> > > drivers/net/wwan/rpmsg_wwan_ctrl.c | 17 +++++++++++++++--
> > > drivers/net/wwan/wwan_core.c | 9 ++++++---
> > > drivers/net/wwan/wwan_hwsim.c | 3 ++-
> > > include/linux/wwan.h | 13 +++++++++----
> > > 6 files changed, 36 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/net/wwan/iosm/iosm_ipc_port.c b/drivers/net/wwan/iosm/iosm_ipc_port.c
> > > index beb944847398..2f874e41ceff 100644
> > > --- a/drivers/net/wwan/iosm/iosm_ipc_port.c
> > > +++ b/drivers/net/wwan/iosm/iosm_ipc_port.c
> > > @@ -31,7 +31,8 @@ static void ipc_port_ctrl_stop(struct wwan_port *port)
> > > }
> > >
> > > /* transfer control data to modem */
> > > -static int ipc_port_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
> > > +static int ipc_port_ctrl_tx(struct wwan_port *port, struct sk_buff *skb,
> > > + bool nonblock)
> > > {
> > > struct iosm_cdev *ipc_port = wwan_port_get_drvdata(port);
> > >
> > > diff --git a/drivers/net/wwan/mhi_wwan_ctrl.c b/drivers/net/wwan/mhi_wwan_ctrl.c
> > > index 1bc6b69aa530..9754f014d348 100644
> > > --- a/drivers/net/wwan/mhi_wwan_ctrl.c
> > > +++ b/drivers/net/wwan/mhi_wwan_ctrl.c
> > > @@ -139,7 +139,8 @@ static void mhi_wwan_ctrl_stop(struct wwan_port *port)
> > > mhi_unprepare_from_transfer(mhiwwan->mhi_dev);
> > > }
> > >
> > > -static int mhi_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
> > > +static int mhi_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb,
> > > + bool nonblock)
> > > {
> > > struct mhi_wwan_dev *mhiwwan = wwan_port_get_drvdata(port);
> > > int ret;
> > > diff --git a/drivers/net/wwan/rpmsg_wwan_ctrl.c b/drivers/net/wwan/rpmsg_wwan_ctrl.c
> > > index de226cdb69fd..63f431eada39 100644
> > > --- a/drivers/net/wwan/rpmsg_wwan_ctrl.c
> > > +++ b/drivers/net/wwan/rpmsg_wwan_ctrl.c
> > > @@ -54,12 +54,16 @@ static void rpmsg_wwan_ctrl_stop(struct wwan_port *port)
> > > rpwwan->ept = NULL;
> > > }
> > >
> > > -static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
> > > +static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb,
> > > + bool nonblock)
> > > {
> > > struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
> > > int ret;
> > >
> > > - ret = rpmsg_trysend(rpwwan->ept, skb->data, skb->len);
> > > + if (nonblock)
> > > + ret = rpmsg_trysend(rpwwan->ept, skb->data, skb->len);
> > > + else
> > > + ret = rpmsg_send(rpwwan->ept, skb->data, skb->len);
> > > if (ret)
> > > return ret;
> > >
> > > @@ -67,10 +71,19 @@ static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
> > > return 0;
> > > }
> > >
> > > +static __poll_t rpmsg_wwan_ctrl_poll(struct wwan_port *port, struct file *filp,
> > > + poll_table *wait)
> > > +{
> > > + struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
> > > +
> > > + return rpmsg_poll(rpwwan->ept, filp, wait);
> > > +}
> > > +
> > > static const struct wwan_port_ops rpmsg_wwan_pops = {
> > > .start = rpmsg_wwan_ctrl_start,
> > > .stop = rpmsg_wwan_ctrl_stop,
> > > .tx = rpmsg_wwan_ctrl_tx,
> > > + .poll = rpmsg_wwan_ctrl_poll,
> > > };
> > >
> > > static struct device *rpmsg_wwan_find_parent(struct device *dev)
> > > diff --git a/drivers/net/wwan/wwan_core.c b/drivers/net/wwan/wwan_core.c
> > > index 7e728042fc41..c7fd0b897f87 100644
> > > --- a/drivers/net/wwan/wwan_core.c
> > > +++ b/drivers/net/wwan/wwan_core.c
> > > @@ -500,7 +500,8 @@ static void wwan_port_op_stop(struct wwan_port *port)
> > > mutex_unlock(&port->ops_lock);
> > > }
> > >
> > > -static int wwan_port_op_tx(struct wwan_port *port, struct sk_buff *skb)
> > > +static int wwan_port_op_tx(struct wwan_port *port, struct sk_buff *skb,
> > > + bool nonblock)
> > > {
> > > int ret;
> > >
> > > @@ -510,7 +511,7 @@ static int wwan_port_op_tx(struct wwan_port *port, struct sk_buff *skb)
> > > goto out_unlock;
> > > }
> > >
> > > - ret = port->ops->tx(port, skb);
> > > + ret = port->ops->tx(port, skb, nonblock);
> > >
> > > out_unlock:
> > > mutex_unlock(&port->ops_lock);
> > > @@ -637,7 +638,7 @@ static ssize_t wwan_port_fops_write(struct file *filp, const char __user *buf,
> > > return -EFAULT;
> > > }
> > >
> > > - ret = wwan_port_op_tx(port, skb);
> > > + ret = wwan_port_op_tx(port, skb, !!(filp->f_flags & O_NONBLOCK));
> > > if (ret) {
> > > kfree_skb(skb);
> > > return ret;
> > > @@ -659,6 +660,8 @@ static __poll_t wwan_port_fops_poll(struct file *filp, poll_table *wait)
> > > mask |= EPOLLIN | EPOLLRDNORM;
> > > if (!port->ops)
> > > mask |= EPOLLHUP | EPOLLERR;
> > > + else if (port->ops->poll)
> > > + mask |= port->ops->poll(port, filp, wait);
> >
> > I'm not sure it useful here because EPOLLOUT flag is already set above, right?
> >
>
> Oops, you're right - sorry! I thought the flags are inverted (only set
> if (is_write_blocked())), then it would have worked fine. :)
>
> I think this should be easy to fix though, I can just make the
>
> if (!is_write_blocked(port))
> mask |= EPOLLOUT | EPOLLWRNORM;
>
> if statement conditional to (port->ops->poll == NULL). It only makes
> sense to supply the poll() op if the built-in write-blocking cannot be
> used easily (like in my case).

Yes, so maybe in that case poll ops should be renamed to something like tx_poll?

Regards,
Loic

Next message: Shaik Sajida Bhanu: "[PATCH V2] dt-bindings: mmc: sdhci-msm: Add compatible string for sc7280"
Previous message: David Howells: "Re: [PATCH v11 01/33] mm: Convert get_page_unless_zero() to return bool"
Next in thread: Stephan Gerhold: "Re: [PATCH net-next 3/3] net: wwan: Allow WWAN drivers to provide blocking tx and poll function"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]