Re: [PATCH 2/2] ASoC: sun50i-dmic: dt-bindings: add DT bindings for DMIC controller

[Maxime Ripard]

On Wed, Jun 16, 2021 at 06:56:25PM +0800, 班涛 wrote:
> Hi,
> 
> Maxime Ripard <maxime@xxxxxxxxxx> 于2021年6月16日周三 下午4:49写道：
> >
> > Hi,
> >
> > On Tue, Jun 15, 2021 at 09:07:37PM +0800, Ban Tao wrote:
> > > The Allwinner SoCs feature an I2S controller across multiple SoC
> > > generations.
> >
> > Which SoC generations?
> >
> > > Signed-off-by: Ban Tao <fengzheng923@xxxxxxxxx>
> > > ---
> > >  .../sound/allwinner,sun50i-h6-dmic.yaml       | 66 +++++++++++++++++++
> > >  1 file changed, 66 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
> > > new file mode 100644
> > > index 000000000000..81d40c374e44
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
> > > @@ -0,0 +1,66 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Allwinner H6 DMIC Controller Device Tree Bindings
> > > +
> > > +maintainers:
> > > +  - Ban Tao <fengzheng923@xxxxxxxxx>
> > > +
> > > +properties:
> > > +  "#sound-dai-cells":
> > > +    const: 0
> > > +
> > > +  compatible:
> > > +    const: allwinner,sun50i-h6-dmic
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Bus Clock
> > > +      - description: Module Clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: apb
> > > +      - const: dmic
> >
> > The convention we use is bus and mod
> >
> > > +
> > > +  dmas:
> > > +    maxItems: 1
> > > +
> > > +  dma-names:
> > > +    const: rx
> > > +
> > > +  resets:
> > > +    maxItems: 1
> > > +
> > > +required:
> > > +  - "#sound-dai-cells"
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - dmas
> > > +  - dma-names
> > > +  - resets
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    spdif: spdif@5095000 {
> >
> > The label and node name seems wrong?
> >
> Yes, in fact, I don’t know much about yaml format files.
> The allwinner,sun50i-h6-dmic.yaml file is based on
> allwinner,sun4i-a10-spdif.yaml.
>
> So, How do i convert txt file to yaml file, for example:
> ---------------------------------------------
> Required properties:
> 
>   - compatible         : should be one of the following:
>     - "allwinner,sun50i-h6-dmic": for the Allwinner H6 SoC
> 
>   - reg                        : physical base address of the
> controller and length of memory mapped region.
> 
>   - dmas               : Generic dma devicetree binding as described in
>                          Documentation/devicetree/bindings/dma/dma.txt.
> 
>   - dma-names          : DMA have to be defined, "rx".
> 
>   - clocks             : Contains an entry for each entry in clock-names.
> 
>   - clock-names                : Includes the following entries:
>        "apb"             clock for the dmic bus.
>        "dmic"           clock for dmic controller.
> 
>   - resets             : reset specifier for the ahb reset
> 
> Example:
> 
> dmic: dmic@5095000 {
>         #sound-dai-cells = <0>;
>         compatible = "allwinner,sun50i-h6-dmic";
>         reg = <0x05095000 0x400>;
>         clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>;
>         clock-names = "apb", "dmic";
>         dmas = <&dma 7>;
>         dma-names = "rx";
>         resets = <&ccu RST_BUS_DMIC>;
> };
> ---------------------------------------------

Just like you already did :)

Aside from the few comments, what you did is spot on. Just remember to
run make dt_binding_check after you wrote your schema

Maxime

Attachment: signature.asc
Description: PGP signature