[PATCH 2/3] dt-bindings: i2c-new: Add bindings for AST2600 I2C

From: Jamin Lin
Date: Thu Jun 17 2021 - 05:46:49 EST


AST2600 support the new register set of I2C controller
Add bindings document to support the new driver of I2C

Signed-off-by: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
---
.../bindings/i2c/aspeed,new-i2c.yaml | 107 ++++++++++++++++++
1 file changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml
new file mode 100644
index 000000000000..2c264596b138
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,new-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST26XX SoCs Device Tree Bindings
+
+description: |
+ ASPEED I2C controller support the new register set since AST26XX
+ The i2c-global-regs device is used to enable new register set
+
+maintainers:
+ - Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - aspeed,ast2600-i2c-bus
+ - items:
+ - enum:
+ - aspeed,ast2600-i2c-global
+ - const: syscon
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: address offset and range of bus
+ - description: address offset and range of bus buffer
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ root clock of bus, should reference the APB
+ clock in the second cell
+
+ resets:
+ maxItems: 1
+
+ bus-frequency:
+ minimum: 100
+ maximum: 5000000
+ default: 100000
+ description: frequency of the bus clock in Hz defaults to 100 kHz when not
+ specified
+
+ multi-master:
+ type: boolean
+ description:
+ states that there is another master active on this bus
+
+ buff-mode:
+ type: boolean
+ description:
+ buffer mode data transfer
+
+ byte-mode:
+ type: boolean
+ description:
+ byte mode tata transfer
+
+ smbus-alert:
+ type: boolean
+ description:
+ smbus alert protocol
+
+required:
+ - reg
+ - compatible
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+ #include <dt-bindings/clock/ast2600-clock.h>
+
+ i2c_gr: i2c-global-regs@0 {
+ compatible = "aspeed,ast2600-i2c-global", "syscon";
+ reg = <0x0 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ };
+
+ i2c0: i2c-bus@80 {
+ compatible = "aspeed,ast2600-i2c-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>, <0xC00 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ bus-frequency = <100000>;
+ };
--
2.17.1