[RFCv1 6/8] phy: amlogic: meson8b-usb2: Use phy reset callback function

[Anand Moon]

Reoder the code for phy reset mode in .reset callback function.
Reset control is shared between two phy so use the phy name
as shared id.

Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
 drivers/phy/amlogic/phy-meson8b-usb2.c | 35 ++++++++++++++++++--------
 1 file changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index ab23a584d7b7..c1ed2e5c80d8 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -133,6 +133,7 @@ struct phy_meson8b_usb2_priv {
 	struct clk_bulk_data                            *clks;
 	struct reset_control				*reset;
 	const struct phy_meson8b_usb2_match_data	*match;
+	int						is_enabled;
 };
 
 static const struct regmap_config phy_meson8b_usb2_regmap_conf = {
@@ -147,14 +148,6 @@ static int phy_meson8b_usb2_init(struct phy *phy)
 	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
 	int ret;
 
-	if (!IS_ERR_OR_NULL(priv->reset)) {
-		ret = reset_control_reset(priv->reset);
-		if (ret) {
-			dev_err(&phy->dev, "Failed to trigger USB reset\n");
-			return ret;
-		}
-	}
-
 	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
 	if (ret) {
 		dev_err(&phy->dev, "Failed to enable USB clock\n");
@@ -173,6 +166,22 @@ static int phy_meson8b_usb2_exit(struct phy *phy)
 	return 0;
 }
 
+static int phy_meson8b_usb2_reset(struct phy *phy)
+{
+	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	if (priv->is_enabled) {
+		ret = reset_control_reset(priv->reset);
+		if (ret) {
+			dev_err(&phy->dev, "Failed to trigger USB reset\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static int phy_meson8b_usb2_setmode(struct phy *phy, enum phy_mode mode,
 				    int submode)
 {
@@ -200,6 +209,8 @@ static int phy_meson8b_usb2_setmode(struct phy *phy, enum phy_mode mode,
 		return -EINVAL;
 	}
 
+	phy_meson8b_usb2_reset(phy);
+
 	priv->dr_mode = mode;
 
 	return 0;
@@ -209,6 +220,8 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)
 {
 	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
 
+	priv->is_enabled = 0;
+
 	if (priv->dr_mode == USB_DR_MODE_HOST)
 		regmap_update_bits(priv->regmap, REG_DBG_UART,
 				   REG_DBG_UART_SET_IDDQ,
@@ -221,6 +234,8 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
 	int ret;
 
+	priv->is_enabled = 1;
+
 	regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
 			   REG_CONFIG_CLK_32k_ALTSEL);
 
@@ -229,7 +244,6 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 
 	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK,
 			   0x5 << REG_CTRL_FSEL_SHIFT);
-
 	/* reset the PHY */
 	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
 			   REG_CTRL_POWER_ON_RESET);
@@ -257,6 +271,7 @@ static const struct phy_ops phy_meson8b_usb2_ops = {
 	.power_on	= phy_meson8b_usb2_power_on,
 	.power_off	= phy_meson8b_usb2_power_off,
 	.set_mode	= phy_meson8b_usb2_setmode,
+	.reset		= phy_meson8b_usb2_reset,
 	.owner		= THIS_MODULE,
 };
 
@@ -301,7 +316,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	priv->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	priv->reset = devm_reset_control_get_optional_shared(&pdev->dev, "phy");
 	if (PTR_ERR(priv->reset) == -EPROBE_DEFER)
 		return PTR_ERR(priv->reset);
 
-- 
2.31.1