[PATCH v1 0/4] MHI event ring priority updates

[Bhaumik Bhatt]

Event ring priorities have remained out of use and are set to 1 by default.
This series brings about an enum entry expanding use of the priority field by
adding high priority tasklet scheduling to the menu.

In some cases, tasklet scheduling delays can be a nuisance. An example would be
ath11k adding a610f3c65d3b ("bus: mhi: Wait for M2 state during system resume")
in response to it. This issue can be potentially avoided if the controller uses
a dedicated event ring for control packets with high priority tasklet scheduling
in place.

There are no functional changes added to the controller (pci_generic or ath11k)
drivers with this series and the only changes there are use of the enum in place
of a harcoded value of "1". In the future, controllers can opt in to have any
event ring scheduled in high priority.

Tested on: X86_64 architecture with SDX65 on Ubuntu 18.04 distribution.

Bhaumik Bhatt (3):
  bus: mhi: pci_generic: Use enum entry for event ring priority
  ath11k: Use enum entry for event ring priority
  bus: mhi: core: Enable support for event ring priorities

Hemant Kumar (1):
  bus: mhi: core: Add support for processing priority of event ring

 drivers/bus/mhi/core/init.c           |  3 +-
 drivers/bus/mhi/core/internal.h       |  2 +-
 drivers/bus/mhi/core/main.c           | 19 ++++++++--
 drivers/bus/mhi/pci_generic.c         | 66 +++++++++++++++++------------------
 drivers/net/wireless/ath/ath11k/mhi.c |  4 +--
 include/linux/mhi.h                   | 14 ++++++--
 6 files changed, 65 insertions(+), 43 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project