[PATCH V2 net-next 6/7] net: hostess_sv11: fix the comments style issue

From: Peng Li
Date: Thu Jun 17 2021 - 22:36:01 EST


Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@xxxxxxxxxx>
---
drivers/net/wan/hostess_sv11.c | 48 ++++++++++++++++--------------------------
1 file changed, 18 insertions(+), 30 deletions(-)

diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 4e11c86..992181a 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -1,6 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Comtrol SV11 card driver
+/* Comtrol SV11 card driver
*
* This is a slightly odd Z85230 synchronous driver. All you need to
* know basically is
@@ -44,8 +43,7 @@

static int dma;

-/*
- * Network driver support routines
+/* Network driver support routines
*/

static inline struct z8530_dev *dev_to_sv(struct net_device *dev)
@@ -53,8 +51,7 @@ static inline struct z8530_dev *dev_to_sv(struct net_device *dev)
return (struct z8530_dev *)dev_to_hdlc(dev)->priv;
}

-/*
- * Frame receive. Simple for our card as we do HDLC and there
+/* Frame receive. Simple for our card as we do HDLC and there
* is no funny garbage involved
*/

@@ -65,15 +62,13 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
skb->protocol = hdlc_type_trans(skb, c->netdevice);
skb_reset_mac_header(skb);
skb->dev = c->netdevice;
- /*
- * Send it to the PPP layer. We don't have time to process
+ /* Send it to the PPP layer. We don't have time to process
* it right now.
*/
netif_rx(skb);
}

-/*
- * We've been placed in the UP state
+/* We've been placed in the UP state
*/

static int hostess_open(struct net_device *d)
@@ -81,8 +76,7 @@ static int hostess_open(struct net_device *d)
struct z8530_dev *sv11 = dev_to_sv(d);
int err = -1;

- /*
- * Link layer up
+ /* Link layer up
*/
switch (dma) {
case 0:
@@ -127,8 +121,7 @@ static int hostess_open(struct net_device *d)
static int hostess_close(struct net_device *d)
{
struct z8530_dev *sv11 = dev_to_sv(d);
- /*
- * Discard new frames
+ /* Discard new frames
*/
sv11->chanA.rx_function = z8530_null_rx;

@@ -154,8 +147,7 @@ static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
return hdlc_ioctl(d, ifr, cmd);
}

-/*
- * Passed network frames, fire them downwind.
+/* Passed network frames, fire them downwind.
*/

static netdev_tx_t hostess_queue_xmit(struct sk_buff *skb,
@@ -172,8 +164,7 @@ static int hostess_attach(struct net_device *dev, unsigned short encoding,
return -EINVAL;
}

-/*
- * Description block for a Comtrol Hostess SV11 card
+/* Description block for a Comtrol Hostess SV11 card
*/

static const struct net_device_ops hostess_ops = {
@@ -187,8 +178,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
{
struct z8530_dev *sv;
struct net_device *netdev;
- /*
- * Get the needed I/O space
+ /* Get the needed I/O space
*/

if (!request_region(iobase, 8, "Comtrol SV11")) {
@@ -200,8 +190,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
if (!sv)
goto err_kzalloc;

- /*
- * Stuff in the I/O addressing
+ /* Stuff in the I/O addressing
*/

sv->active = 0;
@@ -216,7 +205,8 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
outb(0, iobase + 4); /* DMA off */

/* We want a fast IRQ for this device. Actually we'd like an even faster
- IRQ ;) - This is one driver RtLinux is made for */
+ * IRQ ;) - This is one driver RtLinux is made for
+ */

if (request_irq(irq, z8530_interrupt, 0,
"Hostess SV11", sv) < 0) {
@@ -230,8 +220,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
sv->chanB.dev = sv;

if (dma) {
- /*
- * You can have DMA off or 1 and 3 thats the lot
+ /* You can have DMA off or 1 and 3 thats the lot
* on the Comtrol.
*/
sv->chanA.txdma = 3;
@@ -246,11 +235,11 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
}

/* Kill our private IRQ line the hostess can end up chattering
- until the configuration is set */
+ * until the configuration is set
+ */
disable_irq(irq);

- /*
- * Begin normal initialise
+ /* Begin normal initialise
*/

if (z8530_init(sv)) {
@@ -266,8 +255,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)

enable_irq(irq);

- /*
- * Now we can take the IRQ
+ /* Now we can take the IRQ
*/

sv->chanA.netdevice = netdev = alloc_hdlcdev(sv);
--
2.8.1