[PATCH 4/4] PCI: loongson move mrrs quirk to core
From: Artem Lapkin
Date: Sat Jun 19 2021 - 02:40:41 EST
Replace dublicated functionality loongson_mrrs_quirk to mrrs_limit_quirk
from core pci quirks
Signed-off-by: Artem Lapkin <art@xxxxxxxxxx>
---
drivers/pci/controller/pci-loongson.c | 42 ++-------------------------
1 file changed, 3 insertions(+), 39 deletions(-)
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
index 48169b1e3..5a54faf10 100644
--- a/drivers/pci/controller/pci-loongson.c
+++ b/drivers/pci/controller/pci-loongson.c
@@ -13,10 +13,6 @@
#include "../pci.h"
/* Device IDs */
-#define DEV_PCIE_PORT_0 0x7a09
-#define DEV_PCIE_PORT_1 0x7a19
-#define DEV_PCIE_PORT_2 0x7a29
-
#define DEV_LS2K_APB 0x7a02
#define DEV_LS7A_CONF 0x7a10
#define DEV_LS7A_LPC 0x7a0c
@@ -38,11 +34,11 @@ static void bridge_class_quirk(struct pci_dev *dev)
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
- DEV_PCIE_PORT_0, bridge_class_quirk);
+ PCI_DEVICE_ID_LOONGSON_PCIE_PORT_0, bridge_class_quirk);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
- DEV_PCIE_PORT_1, bridge_class_quirk);
+ PCI_DEVICE_ID_LOONGSON_PCIE_PORT_1, bridge_class_quirk);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
- DEV_PCIE_PORT_2, bridge_class_quirk);
+ PCI_DEVICE_ID_LOONGSON_PCIE_PORT_2, bridge_class_quirk);
static void system_bus_quirk(struct pci_dev *pdev)
{
@@ -60,38 +56,6 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
DEV_LS7A_LPC, system_bus_quirk);
-static void loongson_mrrs_quirk(struct pci_dev *dev)
-{
- struct pci_bus *bus = dev->bus;
- struct pci_dev *bridge;
- static const struct pci_device_id bridge_devids[] = {
- { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
- { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
- { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
- { 0, },
- };
-
- /* look for the matching bridge */
- while (!pci_is_root_bus(bus)) {
- bridge = bus->self;
- bus = bus->parent;
- /*
- * Some Loongson PCIe ports have a h/w limitation of
- * 256 bytes maximum read request size. They can't handle
- * anything larger than this. So force this limit on
- * any devices attached under these ports.
- */
- if (pci_match_id(bridge_devids, bridge)) {
- if (pcie_get_readrq(dev) > 256) {
- pci_info(dev, "limiting MRRS to 256\n");
- pcie_set_readrq(dev, 256);
- }
- break;
- }
- }
-}
-DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
-
static void __iomem *cfg1_map(struct loongson_pci *priv, int bus,
unsigned int devfn, int where)
{
--
2.25.1