Re: [PATCH v2] drm/mediatek: force hsa hbp hfp packets multiple of lanenum to avoid screen shift

[Chun-Kuang Hu]

Hi, Jitao:

Jitao Shi <jitao.shi@xxxxxxxxxxxx> 於 2021年6月17日 週四 下午6:32寫道：
>
> The bridge chip "ANX7625" requires the packets on lanes to aligne at the end,
> or ANX7625 will shift the screen.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..4735e0092ffe 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -194,6 +194,8 @@ struct mtk_dsi {
>         struct clk *hs_clk;
>
>         u32 data_rate;
> +       /* force dsi line end without dsi_null data */
> +       bool force_dsi_end_without_null;
>
>         unsigned long mode_flags;
>         enum mipi_dsi_pixel_format format;
> @@ -499,6 +501,13 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
>                 DRM_WARN("HFP + HBP less than d-phy, FPS will under 60Hz\n");
>         }
>
> +       if (dsi->force_dsi_end_without_null) {
> +               horizontal_sync_active_byte = roundup(horizontal_sync_active_byte, dsi->lanes) - 2;
> +               horizontal_frontporch_byte = roundup(horizontal_frontporch_byte, dsi->lanes) - 2;
> +               horizontal_backporch_byte = roundup(horizontal_backporch_byte, dsi->lanes) - 2;
> +               horizontal_backporch_byte -= (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes;
> +       }
> +
>         writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
>         writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
>         writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
> @@ -1095,6 +1104,10 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>         dsi->bridge.of_node = dev->of_node;
>         dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
>
> +       if (dsi->next_bridge)
> +               dsi->force_dsi_end_without_null = of_property_read_bool(dsi->next_bridge->of_node,
> +                                                                       "force_dsi_end_without_null");

This patch looks good to me, but I could not find
"force_dsi_end_without_null" in binding document.

Regards,
Chun-Kuang.

> +
>         drm_bridge_add(&dsi->bridge);
>
>         ret = component_add(&pdev->dev, &mtk_dsi_component_ops);
> --
> 2.25.1