[PATCH v3 10/17] staging: rtl8723bs: remove some unused 5Ghz macro definitions

[Fabio Aiuto]

remove some unused 5Ghz macro definitions. Fix
comments accordingly.

Signed-off-by: Fabio Aiuto <fabioaiuto83@xxxxxxxxx>
---
 drivers/staging/rtl8723bs/hal/odm.h                | 1 -
 drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h | 2 --
 drivers/staging/rtl8723bs/include/hal_com_reg.h    | 1 -
 drivers/staging/rtl8723bs/include/hal_pg.h         | 2 --
 4 files changed, 6 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 788fc1c068b5..afb36de7a4e5 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -628,7 +628,6 @@ struct fat_t { /* _FAST_ANTENNA_TRAINNING_ */
 	u32 MinMaxRSSI;
 	u8 idx_AntDiv_counter_2G;
 	u8 idx_AntDiv_counter_5G;
-	u32 AntDiv_2G_5G;
 	u32 CCK_counter_main;
 	u32 CCK_counter_aux;
 	u32 OFDM_counter_main;
diff --git a/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h b/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
index 4b3a7c051630..aad962548278 100644
--- a/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
+++ b/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
@@ -558,7 +558,6 @@
 
 #define		b3WireRFPowerDown			0x1	/*  Useless now */
 /* define bHWSISelect				0x8 */
-#define		b5GPAPEPolarity				0x40000000
 #define		b2GPAPEPolarity				0x80000000
 #define		bRFSW_TxDefaultAnt			0x3
 #define		bRFSW_TxOptionAnt			0x30
@@ -577,7 +576,6 @@
 #define		bRFSI_ANTSW				0x100
 #define		bRFSI_ANTSWB				0x200
 #define		bRFSI_PAPE					0x400
-#define		bRFSI_PAPE5G				0x800
 #define		bBandSelect					0x1
 #define		bHTSIG2_GI					0x80
 #define		bHTSIG2_Smoothing			0x01
diff --git a/drivers/staging/rtl8723bs/include/hal_com_reg.h b/drivers/staging/rtl8723bs/include/hal_com_reg.h
index b14585cb0233..b2f179b48019 100644
--- a/drivers/staging/rtl8723bs/include/hal_com_reg.h
+++ b/drivers/staging/rtl8723bs/include/hal_com_reg.h
@@ -717,7 +717,6 @@ Default: 00b.
 /*        BW_OPMODE bits				(Offset 0x603, 8bit) */
 /*  */
 #define BW_OPMODE_20MHZ			BIT2
-#define BW_OPMODE_5G				BIT1
 
 /*  */
 /*        CAM Config Setting (offset 0x680, 1 byte) */
diff --git a/drivers/staging/rtl8723bs/include/hal_pg.h b/drivers/staging/rtl8723bs/include/hal_pg.h
index 0b7a8adf5c74..2d8ccc9ddebb 100644
--- a/drivers/staging/rtl8723bs/include/hal_pg.h
+++ b/drivers/staging/rtl8723bs/include/hal_pg.h
@@ -16,10 +16,8 @@
 
 /*  For VHT series TX power by rate table. */
 /*  VHT TX power by rate off setArray = */
-/*  Band:-2G&5G = 0 / 1 */
 /*  RF: at most 4*4 = ABCD = 0/1/2/3 */
 /*  CCK = 0 OFDM = 1/2 HT-MCS 0-15 =3/4/56 VHT =7/8/9/10/11 */
-#define TX_PWR_BY_RATE_NUM_BAND			2
 #define TX_PWR_BY_RATE_NUM_RF			4
 #define TX_PWR_BY_RATE_NUM_RATE			84
 #define MAX_RF_PATH_NUM				2
-- 
2.20.1