Re: [PATCH v7 3/5] soc: qcom: spm: Implement support for SAWv4.1, SDM630/660 L2 AVS
From: Stephan Gerhold
Date: Tue Jun 22 2021 - 11:15:06 EST
On Tue, Jun 22, 2021 at 04:11:15PM +0200, AngeloGioacchino Del Regno wrote:
> Implement the support for SAW v4.1, used in at least MSM8998,
> SDM630, SDM660 and APQ variants and, while at it, also add the
> configuration for the SDM630/660 Silver and Gold cluster L2
> Adaptive Voltage Scaler: this is also one of the prerequisites
> to allow the OSM controller to perform DCVS.
>
> Please note that despite there are various "versions" of these
> values downstream, these are the only ones that are perfectly
> stable on the entire set of tested devices.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
I can't say much about this platform but I trust that Angelo
knows what he is doing. :) I found the values used here in
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-pm.dtsi?h=LA.UM.8.2.r2-04600-sdm660.0&id=c2c950b468079a41c31d819051ffb8d9ad9eac8f
So I think it's okay to provide a (somewhat limited)
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> drivers/soc/qcom/spm.c | 32 +++++++++++++++++++++++++++++---
> include/soc/qcom/spm.h | 4 +++-
> 2 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
> index 9b6f649c9a10..1401db8373dd 100644
> --- a/drivers/soc/qcom/spm.c
> +++ b/drivers/soc/qcom/spm.c
> @@ -32,10 +32,29 @@ enum spm_reg {
> SPM_REG_SEQ_ENTRY,
> SPM_REG_SPM_STS,
> SPM_REG_PMIC_STS,
> + SPM_REG_AVS_CTL,
> + SPM_REG_AVS_LIMIT,
> SPM_REG_NR,
> };
>
> -static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
> +static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = {
> + [SPM_REG_AVS_CTL] = 0x904,
> + [SPM_REG_AVS_LIMIT] = 0x908,
> +};
> +
> +static const struct spm_reg_data spm_reg_660_gold_l2 = {
> + .reg_offset = spm_reg_offset_v4_1,
> + .avs_ctl = 0x1010031,
> + .avs_limit = 0x4580458,
> +};
> +
> +static const struct spm_reg_data spm_reg_660_silver_l2 = {
> + .reg_offset = spm_reg_offset_v4_1,
> + .avs_ctl = 0x101c031,
> + .avs_limit = 0x4580458,
> +};
> +
> +static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = {
> [SPM_REG_CFG] = 0x08,
> [SPM_REG_SPM_CTL] = 0x30,
> [SPM_REG_DLY] = 0x34,
> @@ -54,7 +73,7 @@ static const struct spm_reg_data spm_reg_8974_8084_cpu = {
> .start_index[PM_SLEEP_MODE_SPC] = 3,
> };
>
> -static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
> +static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = {
> [SPM_REG_CFG] = 0x08,
> [SPM_REG_SPM_CTL] = 0x20,
> [SPM_REG_PMIC_DLY] = 0x24,
> @@ -126,6 +145,10 @@ void spm_set_low_power_mode(struct spm_driver_data *drv,
> }
>
> static const struct of_device_id spm_match_table[] = {
> + { .compatible = "qcom,sdm660-gold-saw2-v4.1-l2",
> + .data = &spm_reg_660_gold_l2 },
> + { .compatible = "qcom,sdm660-silver-saw2-v4.1-l2",
> + .data = &spm_reg_660_silver_l2 },
> { .compatible = "qcom,msm8974-saw2-v2.1-cpu",
> .data = &spm_reg_8974_8084_cpu },
> { .compatible = "qcom,apq8084-saw2-v2.1-cpu",
> @@ -169,6 +192,8 @@ static int spm_dev_probe(struct platform_device *pdev)
> * CPU was held in reset, the reset signal could trigger the SPM state
> * machine, before the sequences are completely written.
> */
> + spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl);
> + spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit);
> spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
> spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
> spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
> @@ -178,7 +203,8 @@ static int spm_dev_probe(struct platform_device *pdev)
> drv->reg_data->pmic_data[1]);
>
> /* Set up Standby as the default low power mode */
> - spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
> + if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL])
> + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
>
> return 0;
> }
> diff --git a/include/soc/qcom/spm.h b/include/soc/qcom/spm.h
> index 4c7e5ac2583d..4951f9d8b0bd 100644
> --- a/include/soc/qcom/spm.h
> +++ b/include/soc/qcom/spm.h
> @@ -21,11 +21,13 @@ enum pm_sleep_mode {
> };
>
> struct spm_reg_data {
> - const u8 *reg_offset;
> + const u16 *reg_offset;
> u32 spm_cfg;
> u32 spm_dly;
> u32 pmic_dly;
> u32 pmic_data[MAX_PMIC_DATA];
> + u32 avs_ctl;
> + u32 avs_limit;
> u8 seq[MAX_SEQ_DATA];
> u8 start_index[PM_SLEEP_MODE_NR];
> };
> --
> 2.32.0
>