[PATCH v6 3/8] staging: phy-hi3670-usb3: do some additional cleanups
From: Mauro Carvalho Chehab
Date: Wed Jun 23 2021 - 06:11:52 EST
Before moving this driver out of staging, do a couple of
cleanups, in order to make the driver clearer.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 89 +++++++++++--------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 7 +-
2 files changed, 57 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 626140cb96f2..2b7172560df7 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -33,17 +33,27 @@ enum hi6421_spmi_pmic_irq_list {
SIM0_HPD_F,
SIM1_HPD_R,
SIM1_HPD_F,
- PMIC_IRQ_LIST_MAX,
+
+ PMIC_IRQ_LIST_MAX
};
-#define HISI_IRQ_ARRAY 2
-#define HISI_IRQ_NUM (HISI_IRQ_ARRAY * 8)
+#define HISI_IRQ_BANK_SIZE 2
-#define HISI_IRQ_KEY_NUM 0
+/*
+ * IRQ number for the power key button and mask for both UP and DOWN IRQs
+ */
+#define HISI_POWERKEY_IRQ_NUM 0
+#define HISI_IRQ_POWERKEY_UP_DOWN (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-#define HISI_BITS 8
-#define HISI_IRQ_KEY_VALUE (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-#define HISI_MASK GENMASK(HISI_BITS - 1, 0)
+/*
+ * Registers for IRQ address and IRQ mask bits
+ *
+ * Please notice that we need to regmap a larger region, as other
+ * registers are used by the regulators.
+ * See drivers/regulator/hi6421-regulator.c.
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
+#define SOC_PMIC_IRQ0_ADDR 0x0212
/*
* The IRQs are mapped as:
@@ -67,13 +77,14 @@ enum hi6421_spmi_pmic_irq_list {
* SIM1_HPD_R 0x0203 0x213 bit 4
* SIM1_HPD_F 0x0203 0x213 bit 5
* ====================== ============= ============ =====
+ *
+ * Each mask register contains 8 bits. The ancillary macros below
+ * convert a number from 0 to 14 into a register address and a bit mask
*/
-#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
-#define SOC_PMIC_IRQ0_ADDR 0x0212
-
-#define IRQ_MASK_REGISTER(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \
- (irqd_to_hwirq(irq_data) >> 3))
-#define IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & 0x07)
+#define HISI_IRQ_MASK_REG(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \
+ (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
+#define HISI_IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
+#define HISI_8BITS_MASK GENMASK(BITS_PER_BYTE - 1, 0)
static const struct mfd_cell hi6421v600_devs[] = {
{ .name = "hi6421v600-regulator", },
@@ -86,23 +97,30 @@ static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
unsigned int in;
int i, offset;
- for (i = 0; i < HISI_IRQ_ARRAY; i++) {
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
- pending = HISI_MASK & in;
+
+ /* Mark pending IRQs as handled */
+ pending = HISI_8BITS_MASK & in;
regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, pending);
- if (i == HISI_IRQ_KEY_NUM &&
- (pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE) {
+ if (i == HISI_POWERKEY_IRQ_NUM &&
+ (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
+ /*
+ * If both powerkey down and up IRQs are received,
+ * handle them at the right order
+ */
generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
generic_handle_irq(ddata->irqs[POWERKEY_UP]);
- pending &= (~HISI_IRQ_KEY_VALUE);
+ pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
}
if (!pending)
continue;
- for_each_set_bit(offset, &pending, HISI_BITS)
- generic_handle_irq(ddata->irqs[offset + i * HISI_BITS]);
+ for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
+ generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
+ }
}
return IRQ_HANDLED;
@@ -115,12 +133,12 @@ static void hi6421_spmi_irq_mask(struct irq_data *d)
unsigned int data;
u32 offset;
- offset = IRQ_MASK_REGISTER(d);
+ offset = HISI_IRQ_MASK_REG(d);
spin_lock_irqsave(&ddata->lock, flags);
regmap_read(ddata->regmap, offset, &data);
- data |= IRQ_MASK_BIT(d);
+ data |= HISI_IRQ_MASK_BIT(d);
regmap_write(ddata->regmap, offset, data);
spin_unlock_irqrestore(&ddata->lock, flags);
@@ -132,20 +150,19 @@ static void hi6421_spmi_irq_unmask(struct irq_data *d)
u32 data, offset;
unsigned long flags;
- offset = (irqd_to_hwirq(d) >> 3);
- offset += SOC_PMIC_IRQ_MASK_0_ADDR;
+ offset = HISI_IRQ_MASK_REG(d);
spin_lock_irqsave(&ddata->lock, flags);
regmap_read(ddata->regmap, offset, &data);
- data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
+ data &= ~HISI_IRQ_MASK_BIT(d);
regmap_write(ddata->regmap, offset, data);
spin_unlock_irqrestore(&ddata->lock, flags);
}
static struct irq_chip hi6421_spmi_pmu_irqchip = {
- .name = "hisi-irq",
+ .name = "hi6421v600-irq",
.irq_mask = hi6421_spmi_irq_mask,
.irq_unmask = hi6421_spmi_irq_unmask,
.irq_disable = hi6421_spmi_irq_mask,
@@ -158,7 +175,7 @@ static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
struct hi6421_spmi_pmic *ddata = d->host_data;
irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
- handle_simple_irq, "hisi");
+ handle_simple_irq, "hi6421v600");
irq_set_chip_data(virq, ddata);
irq_set_irq_type(virq, IRQ_TYPE_NONE);
@@ -175,20 +192,22 @@ static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
int i;
unsigned int pending;
- for (i = 0; i < HISI_IRQ_ARRAY; i++)
+ /* Mask all IRQs */
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
- HISI_MASK);
+ HISI_8BITS_MASK);
- for (i = 0; i < HISI_IRQ_ARRAY; i++) {
+ /* Mark all IRQs as handled */
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
- HISI_MASK);
+ HISI_8BITS_MASK);
}
}
static const struct regmap_config regmap_config = {
.reg_bits = 16,
- .val_bits = HISI_BITS,
+ .val_bits = BITS_PER_BYTE,
.max_register = 0xffff,
.fast_io = true
};
@@ -230,18 +249,18 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
hi6421_spmi_pmic_irq_init(ddata);
- ddata->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
+ ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
if (!ddata->irqs)
return -ENOMEM;
- ddata->domain = irq_domain_add_simple(np, HISI_IRQ_NUM, 0,
+ ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
&hi6421_spmi_domain_ops, ddata);
if (!ddata->domain) {
dev_err(dev, "Failed to create IRQ domain\n");
return -ENODEV;
}
- for (i = 0; i < HISI_IRQ_NUM; i++) {
+ for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
virq = irq_create_mapping(ddata->domain, i);
if (!virq) {
dev_err(dev, "Failed to map H/W IRQ\n");
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
index 3b23ad56b31a..8e355cddd437 100644
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
@@ -17,7 +17,7 @@ description: |
node.
The SPMI controller part is provided by
- drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml.
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
properties:
$nodename:
@@ -32,12 +32,11 @@ properties:
'#interrupt-cells':
const: 2
- interrupt-controller:
- description:
- Identify that the PMIC is capable of behaving as an interrupt controller.
+ interrupt-controller: true
gpios:
maxItems: 1
+ description: GPIO used for IRQs
regulators:
type: object
--
2.31.1