[PATCH 0/4] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY

[alexandru.tachici]

From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>

The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for
industrial Ethernet applications and is compliant with the IEEE 802.3cg
Ethernet standard for long reach 10 Mb/s Single Pair Ethernet.

1. Add basic support for ADIN1100.

Alexandru Ardelean (1):
  net: phy: adin1100: Add initial support for ADIN1100 industrial PHY

1. Allow user to access error and frame counters through ethtool.

2. Allow user to set the master-slave configuration of ADIN1100.

3. Convert MSE to SQI using a predefined table and allow user access
through ethtool.

Alexandru Tachici (3):
  net: phy: adin1100: Add ethtool get_stats support
  net: phy: adin1100: Add ethtool master-slave support
  net: phy: adin1100: Add SQI support

 drivers/net/phy/Kconfig    |   7 +
 drivers/net/phy/Makefile   |   1 +
 drivers/net/phy/adin1100.c | 642 +++++++++++++++++++++++++++++++++++++
 3 files changed, 650 insertions(+)
 create mode 100644 drivers/net/phy/adin1100.c

--
2.25.1