Re: [PATCH net-next] net: phy: marvell10g: enable WoL for mv2110

[Wong Vee Khee]

Hi Russell,

On Wed, Jun 23, 2021 at 09:06:18PM +0100, Russell King (Oracle) wrote:
> On Wed, Jun 23, 2021 at 09:09:29PM +0800, Ling Pei Lee wrote:
> > +static void mv2110_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
> > +{
> > +	int ret = 0;
> 
> This initialiser doesn't do anything.
> 
> > +
> > +	wol->supported = WAKE_MAGIC;
> > +	wol->wolopts = 0;
> > +
> > +	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_WOL_CTRL);
> > +
> > +	if (ret & MV_V2_WOL_MAGIC_PKT_EN)
> > +		wol->wolopts |= WAKE_MAGIC;
> 
> You need to check whether "ret" is a negative number - if phy_read_mmd()
> returns an error, this test could be true or false. It would be better
> to have well defined behaviour (e.g. reporting that WOL is disabled?)
> 
> > +		/* Reset the clear WOL status bit as it does not self-clear */
> > +		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
> > +					 MV_V2_WOL_CTRL,
> > +					 MV_V2_WOL_CLEAR_STS);
> > +
> > +		if (ret < 0)
> > +			return ret;
> > +	} else {
> > +		/* Disable magic packet matching & reset WOL status bit */
> > +		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
> > +				     MV_V2_WOL_CTRL,
> > +				     MV_V2_WOL_MAGIC_PKT_EN,
> > +				     MV_V2_WOL_CLEAR_STS);
> > +
> > +		if (ret < 0)
> > +			return ret;
> > +
> > +		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
> > +					 MV_V2_WOL_CTRL,
> > +					 MV_V2_WOL_CLEAR_STS);
> > +
> > +		if (ret < 0)
> > +			return ret;
> 
> This phy_clear_bits_mmd() is the same as the tail end of the other part
> of the if() clause. Consider moving it after the if () { } else { }
> statement...
> 
> > +	}
> > +
> > +	return ret;
> 
> and as all paths return "ret" just do:
> 
> 	return phy_clear_bits_mmd(...
> 
> I will also need to check whether this is the same as the 88x3310, but
> I'm afraid I don't have the energy this evening - please email me a
> remind to look at this tomorrow. Thanks.
>

Shall we add this for the 88x3310 as well?

BR,
 VK