[PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6115 pinctrl bindings

[Iskren Chernev]

Add device tree binding Documentation details for Qualcomm SM6115 and
SM4250 pinctrl.

Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 208 ++++++++++++++++++
 1 file changed, 208 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
new file mode 100644
index 000000000000..92443a836e86
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@xxxxxxxxx>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM6115 and SM4250 platforms.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm4250-tlmm
+      - qcom,sm6115-tlmm
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: south
+      - const: east
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6115-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm6115-tlmm-state"
+
+'$defs':
+  qcom-sm6115-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ qup0, gpio, ddr_bist, phase_flag0, qdss_gpio8, atest_tsens,
+                mpm_pwr, m_voc, phase_flag1, qdss_gpio9, atest_tsens2,
+                phase_flag2, qdss_gpio10, dac_calib0, atest_usb10,
+                phase_flag3, qdss_gpio11, dac_calib1, atest_usb11, qup1,
+                cri_trng0, phase_flag4, dac_calib2, atest_usb12, cri_trng1,
+                phase_flag5, dac_calib3, atest_usb13, qup2, phase_flag6,
+                dac_calib4, atest_usb1, qup3, pbs_out, pll_bist, qdss_gpio,
+                tsense_pwm, agera_pll, pbs0, qdss_gpio0, pbs1, qdss_gpio1,
+                qup4, tgu_ch0, tgu_ch1, qup5, tgu_ch2, phase_flag7,
+                qdss_gpio4, dac_calib5, tgu_ch3, phase_flag8, qdss_gpio5,
+                dac_calib6, phase_flag9, qdss_gpio6, dac_calib7,
+                phase_flag10, qdss_gpio7, dac_calib8, sdc2_tb, cri_trng,
+                pbs2, qdss_gpio2, sdc1_tb, pbs3, qdss_gpio3, cam_mclk, pbs4,
+                adsp_ext, pbs5, cci_i2c, prng_rosc, pbs6, phase_flag11,
+                dac_calib9, atest_usb20, pbs7, phase_flag12, dac_calib10,
+                atest_usb21, cci_timer1, gcc_gp1, pbs8, phase_flag13,
+                dac_calib11, atest_usb22, cci_async, cci_timer0, pbs9,
+                phase_flag14, dac_calib12, atest_usb23, pbs10, phase_flag15,
+                dac_calib13, atest_usb2, vsense_trigger, qdss_cti,
+                cci_timer2, phase_flag16, dac_calib14, atest_char,
+                phase_flag17, dac_calib15, atest_char0, gp_pdm0,
+                phase_flag18, dac_calib16, atest_char1, cci_timer3, gp_pdm1,
+                phase_flag19, dac_calib17, atest_char2, gp_pdm2,
+                phase_flag20, dac_calib18, atest_char3, phase_flag21,
+                phase_flag22, nav_gpio, phase_flag23, phase_flag24,
+                phase_flag25, pbs14, qdss_gpio14, vfr_1, pbs15, qdss_gpio15,
+                pa_indicator, gsm1_tx, ssbi_wtr1, pll_bypassnl, pll_reset,
+                phase_flag26, ddr_pxi0, gsm0_tx, phase_flag27, gcc_gp2,
+                qdss_gpio12, ddr_pxi1, gcc_gp3, qdss_gpio13, dbg_out,
+                uim2_data, uim2_clk, uim2_reset, uim2_present, uim1_data,
+                uim1_clk, uim1_reset, uim1_present, dac_calib19, mdp_vsync,
+                mdp_vsync_out_0, mdp_vsync_out_1, dac_calib20, dac_calib21,
+                atest_bbrx1, pbs11, usb_phy, atest_bbrx0, mss_lte, pbs12,
+                pbs13, wlan1_adc0, wlan1_adc1, sd_write, jitter_bist,
+                atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native,
+                phase_flag28, dac_calib22, ddr_pxi2, phase_flag29,
+                dac_calib23, phase_flag30, dac_calib24, ddr_pxi3,
+                phase_flag31, dac_calib25 ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@500000 {
+                compatible = "qcom,sm4250-tlmm";
+                reg = <0x500000 0x400000>,
+                        <0x900000 0x400000>,
+                        <0xd00000 0x400000>;
+                reg-names = "west", "south", "east";
+                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 114>;
+
+                sdc2_on_state: sdc2-on-state {
+                        clk {
+                                pins = "sdc2_clk";
+                                bias-disable;
+                                drive-strength = <16>;
+                        };
+
+                        cmd {
+                                pins = "sdc2_cmd";
+                                bias-pull-up;
+                                drive-strength = <10>;
+                        };
+
+                        data {
+                                pins = "sdc2_data";
+                                bias-pull-up;
+                                drive-strength = <10>;
+                        };
+
+                        sd-cd {
+                                pins = "gpio88";
+                                function = "gpio";
+                                bias-pull-up;
+                                drive-strength = <2>;
+                        };
+                };
+        };
+
-- 
2.32.0