[PATCH net-next V2 0/3] Add option to enable PHY WOL with PMT enabled

[Ling Pei Lee]

This patchset main objective is to provide an option to enable PHY WoL even the PMT is enabled by default in the HW features.

The current stmmac driver WOL implementation will enable MAC WOL if MAC HW PMT feature is on. Else, the driver will check for PHY WOL support.
Intel EHL mgbe are designed to wake up through PHY WOL although the HW PMT is enabled.Hence, introduced use_phy_wol platform data to provide this PHY WOL option. Set use_phy_wol will disable the plat->pmt which currently used to determine the system to wake up by MAC WOL or PHY WOL.

This WOL patchset includes of setting the device power state to D3hot.
This is because the EHL PSE will need to PSE mgbe to be in D3 state in order for the PSE to goes into suspend mode.

Change Log:
 V2: Drop Patch #3 net: stmmac: Reconfigure the PHY WOL settings in stmmac_resume().

Ling Pei Lee (2):
  net: stmmac: option to enable PHY WOL with PMT enabled
  stmmac: intel: Enable PHY WOL option in EHL

Voon Weifeng (1):
  stmmac: intel: set PCI_D3hot in suspend

 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 2 ++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
 include/linux/stmmac.h                            | 1 +
 3 files changed, 5 insertions(+), 1 deletion(-)

-- 
2.25.1