Re: [PATCH v6 2/4] iio: adc: Add Xilinx AMS driver

From: Dan Carpenter
Date: Tue Jun 29 2021 - 04:33:47 EST

Next message: Daniel Wagner: "Re: [PATCH 1/1] block: System crashes when cpu hotplug + bouncing port"
Previous message: Thomas Bogendoerfer: "Re: [PATCH v3] mm: Fix the problem of mips architecture Oops"
In reply to: kernel test robot: "Re: [PATCH v6 2/4] iio: adc: Add Xilinx AMS driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Anand,

url: https://github.com/0day-ci/linux/commits/Anand-Ashok-Dumbre/Add-Xilinx-AMS-Driver/20210625-023047
base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: microblaze-randconfig-m031-20210628 (attached as .config)
compiler: microblaze-linux-gcc (GCC) 9.3.0

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>

smatch warnings:
drivers/iio/adc/xilinx-ams.c:406 ams_enable_channel_sequence() warn: should '(((1))) << (indio_dev->channels[i]->scan_index)' be a 64 bit type?
drivers/iio/adc/xilinx-ams.c:1126 ams_init_module() error: uninitialized symbol 'chan_node'.

vim +406 drivers/iio/adc/xilinx-ams.c

fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 392 static void ams_enable_channel_sequence(struct iio_dev *indio_dev)
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 393 {
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 394 int i;
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 395 unsigned long long scan_mask;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 396 struct ams *ams = iio_priv(indio_dev);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 397
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 398 /*
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 399 * Enable channel sequence. First 22 bits of scan_mask represent
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 400 * PS channels, and next remaining bits represent PL channels.
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 401 */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 402
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 403 /* Run calibration of PS & PL as part of the sequence */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 404 scan_mask = 0x1 | BIT(AMS_PS_SEQ_MAX);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 405 for (i = 0; i < indio_dev->num_channels; i++)
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 @406 scan_mask |= BIT(indio_dev->channels[i].scan_index);

Since scan_mask is ull should we use BIT_ULL() instead of BIT()?

(I haven't look at the context outside of this email so I don't know
the value of indio_dev->num_channels).

fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 407
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 408 if (ams->ps_base) {
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 409 /* put sysmon in a soft reset to change the sequence */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 410 ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 411 AMS_CONF1_SEQ_DEFAULT);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 412
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 413 /* configure basic channels */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 414 writel(scan_mask & AMS_REG_SEQ0_MASK,
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 415 ams->ps_base + AMS_REG_SEQ_CH0);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 416 writel(AMS_REG_SEQ2_MASK &
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 417 (scan_mask >> AMS_REG_SEQ2_MASK_SHIFT),
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 418 ams->ps_base + AMS_REG_SEQ_CH2);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 419
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 420 /* set continuous sequence mode */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 421 ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 422 AMS_CONF1_SEQ_CONTINUOUS);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 423 }
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 424
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 425 if (ams->pl_base) {
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 426 /* put sysmon in a soft reset to change the sequence */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 427 ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 428 AMS_CONF1_SEQ_DEFAULT);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 429
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 430 /* configure basic channels */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 431 scan_mask = scan_mask >> AMS_PS_SEQ_MAX;
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 432 writel(scan_mask & AMS_REG_SEQ0_MASK,
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 433 ams->pl_base + AMS_REG_SEQ_CH0);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 434 writel(AMS_REG_SEQ2_MASK &
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 435 (scan_mask >> AMS_REG_SEQ2_MASK_SHIFT),
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 436 ams->pl_base + AMS_REG_SEQ_CH2);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 437 writel(AMS_REG_SEQ1_MASK &
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 438 (scan_mask >> AMS_REG_SEQ1_MASK_SHIFT),
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 439 ams->pl_base + AMS_REG_SEQ_CH1);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 440
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 441 /* set continuous sequence mode */
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 442 ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 443 AMS_CONF1_SEQ_CONTINUOUS);
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 444 }
fa0ea7aaf7a9bf Anand Ashok Dumbre 2021-06-24 445 }

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@xxxxxxxxxxxx

Next message: Daniel Wagner: "Re: [PATCH 1/1] block: System crashes when cpu hotplug + bouncing port"
Previous message: Thomas Bogendoerfer: "Re: [PATCH v3] mm: Fix the problem of mips architecture Oops"
In reply to: kernel test robot: "Re: [PATCH v6 2/4] iio: adc: Add Xilinx AMS driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]