Re: [PATCH 3/3] phy: mscc: Add support for VSC8531_02 with RGMII tuning

[Harini Katakam]

Hi Heiner,

On Tue, Jun 29, 2021 at 4:11 PM Heiner Kallweit <hkallweit1@xxxxxxxxx> wrote:
>
> On 29.06.2021 11:40, Harini Katakam wrote:
> > Add support for VSC8531_02 (Rev 2) device.
> > Add support for optional RGMII RX and TX delay tuning via devicetree.
> > The hierarchy is:
> > - Retain the defaul 0.2ns delay when RGMII tuning is not set.
> > - Retain the default 2ns delay when RGMII tuning is set and DT delay
> > property is NOT specified.
> > - Use the DT delay value when RGMII tuning is set and a DT delay
> > property is specified.
> >
> > Signed-off-by: Harini Katakam <harini.katakam@xxxxxxxxxx>
> > Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
> > Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> > ---
> >  drivers/net/phy/mscc/mscc.h      |  3 +++
> >  drivers/net/phy/mscc/mscc_main.c | 41 ++++++++++++++++++++++++++++++--
> >  2 files changed, 42 insertions(+), 2 deletions(-)
> >
<snip>
>  {
> >       .phy_id         = PHY_ID_VSC8540,
> >       .name           = "Microsemi FE VSC8540 SyncE",
> > @@ -2668,6 +2704,7 @@ static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
> >       { PHY_ID_VSC8514, 0xfffffff0, },
> >       { PHY_ID_VSC8530, 0xfffffff0, },
> >       { PHY_ID_VSC8531, 0xfffffff0, },
> > +     { PHY_ID_VSC8531_02, 0xfffffff0, },
>
> Effectively this is the same as the line before. Maybe it would make sense
> to change this table in a follow-up patch to just one entry covering all
> PHY ID's with the vendor part being Microsemi, e.g. using macro
> PHY_ID_MATCH_VENDOR().

Thanks for the review. Let me check and test - I have a couple of these parts.
Will try to include the patch in this series.

Regards,
Harini