Re: [PATCH net-next V2 0/3] Add option to enable PHY WOL with PMT enabled

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Tue, 29 Jun 2021 11:08:56 +0800 you wrote:
> This patchset main objective is to provide an option to enable PHY WoL even the PMT is enabled by default in the HW features.
> 
> The current stmmac driver WOL implementation will enable MAC WOL if MAC HW PMT feature is on. Else, the driver will check for PHY WOL support.
> Intel EHL mgbe are designed to wake up through PHY WOL although the HW PMT is enabled.Hence, introduced use_phy_wol platform data to provide this PHY WOL option. Set use_phy_wol will disable the plat->pmt which currently used to determine the system to wake up by MAC WOL or PHY WOL.
> 
> This WOL patchset includes of setting the device power state to D3hot.
> This is because the EHL PSE will need to PSE mgbe to be in D3 state in order for the PSE to goes into suspend mode.
> 
> [...]

Here is the summary with links:
  - [net-next,V2,1/3] net: stmmac: option to enable PHY WOL with PMT enabled
    https://git.kernel.org/netdev/net-next/c/5a9b876e9d76
  - [net-next,V2,2/3] stmmac: intel: Enable PHY WOL option in EHL
    https://git.kernel.org/netdev/net-next/c/945beb755633
  - [net-next,V2,3/3] stmmac: intel: set PCI_D3hot in suspend
    https://git.kernel.org/netdev/net-next/c/1dd53a61488d

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html