[PATCH v5 2/3] scsi: sd: send REQUEST SENSE for BLIST_MEDIA_CHANGE devices in runtime_resume()

[Martin Kepplinger]

For SD cardreader devices that have the BLIST_MEDIA_CHANGE flag set,
a MEDIA CHANGE unit attention is received after resuming from runtime
suspend. Send a REQUEST SENSE to avoid that.

The "downside" is that for these devices we now rely on users not to
really change the medium (SD card) *during* a runtime suspend/resume
cycle, i.e. when not unmounting.

To enable runtime PM for an SD cardreader (device number 0:0:0:0), do:

echo 0 > /sys/module/block/parameters/events_dfl_poll_msecs
echo 1000 > /sys/bus/scsi/devices/0:0:0:0/power/autosuspend_delay_ms
echo auto > /sys/bus/scsi/devices/0:0:0:0/power/control

Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
 drivers/scsi/sd.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 6d2d63629a90..b02378f40620 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -63,6 +63,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_device.h>
+#include <scsi/scsi_devinfo.h>
 #include <scsi/scsi_driver.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_host.h>
@@ -114,6 +115,7 @@ static void sd_shutdown(struct device *);
 static int sd_suspend_system(struct device *);
 static int sd_suspend_runtime(struct device *);
 static int sd_resume(struct device *);
+static int sd_resume_runtime(struct device *);
 static void sd_rescan(struct device *);
 static blk_status_t sd_init_command(struct scsi_cmnd *SCpnt);
 static void sd_uninit_command(struct scsi_cmnd *SCpnt);
@@ -608,7 +610,7 @@ static const struct dev_pm_ops sd_pm_ops = {
 	.poweroff		= sd_suspend_system,
 	.restore		= sd_resume,
 	.runtime_suspend	= sd_suspend_runtime,
-	.runtime_resume		= sd_resume,
+	.runtime_resume		= sd_resume_runtime,
 };
 
 static struct scsi_driver sd_template = {
@@ -3720,6 +3722,28 @@ static int sd_resume(struct device *dev)
 	return ret;
 }
 
+static int sd_resume_runtime(struct device *dev)
+{
+	struct scsi_disk *sdkp = dev_get_drvdata(dev);
+	struct scsi_device *sdp = sdkp->device;
+	int timeout, res;
+
+	timeout = sdp->request_queue->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
+
+	if (sdp->sdev_bflags & BLIST_MEDIA_CHANGE) {
+		/* clear the devices' sense data */
+		static const u8 cmd[10] = { REQUEST_SENSE };
+
+		res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL,
+				   NULL, timeout, 1, 0, RQF_PM, NULL);
+		if (res)
+			sd_printk(KERN_NOTICE, sdkp,
+				  "Failed to clear sense data\n");
+	}
+
+	return sd_resume(dev);
+}
+
 /**
  *	init_sd - entry point for this driver (both when built in or when
  *	a module).
-- 
2.30.2