Re: [RFC PATCH] cw1200: use kmalloc() allocation instead of stack

[Ulf Hansson]

On Wed, 30 Jun 2021 at 12:09, Jernej Škrabec <jernej.skrabec@xxxxxxxxx> wrote:
>
> Hi Ulf!
>
> Dne sreda, 30. junij 2021 ob 12:03:13 CEST je Ulf Hansson napisal(a):
> > On Tue, 22 Jun 2021 at 22:23, Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> wrote:
> > > It turns out that if CONFIG_VMAP_STACK is enabled and src or dst is
> > > memory allocated on stack, SDIO operations fail due to invalid memory
> > > address conversion:
> > >
> > > cw1200_wlan_sdio: Probe called
> > > sunxi-mmc 4021000.mmc: DMA addr 0x0000800051eab954+4 overflow (mask
> > > ffffffff, bus limit 0). WARNING: CPU: 2 PID: 152 at
> > > kernel/dma/direct.h:97 dma_direct_map_sg+0x26c/0x28c CPU: 2 PID: 152
> > > Comm: kworker/2:2 Not tainted 5.13.0-rc1-00026-g84114ef026b9-dirty #85
> > > Hardware name: X96 Mate (DT)
> > > Workqueue: events_freezable mmc_rescan
> > > pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> > > pc : dma_direct_map_sg+0x26c/0x28c
> > > lr : dma_direct_map_sg+0x26c/0x28c
> > > sp : ffff800011eab540
> > > x29: ffff800011eab540 x28: ffff800011eab738 x27: 0000000000000000
> > > x26: ffff000001daf010 x25: 0000000000000000 x24: 0000000000000000
> > > x23: 0000000000000002 x22: fffffc0000000000 x21: ffff8000113b0ab0
> > > x20: ffff80001181abb0 x19: 0000000000000001 x18: ffffffffffffffff
> > > x17: 00000000fa97f83f x16: 00000000d2e01bf8 x15: ffff8000117ffb1d
> > > x14: ffffffffffffffff x13: ffff8000117ffb18 x12: fffffffffffc593f
> > > x11: ffff800011676ad0 x10: fffffffffffe0000 x9 : ffff800011eab540
> > > x8 : 206b73616d282077 x7 : 000000000000000f x6 : 000000000000000c
> > > x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
> > > x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00000283b800
> > >
> > > Call trace:
> > >  dma_direct_map_sg+0x26c/0x28c
> > >  dma_map_sg_attrs+0x2c/0x60
> > >  sunxi_mmc_request+0x70/0x420
> > >  __mmc_start_request+0x68/0x134
> > >  mmc_start_request+0x84/0xac
> > >  mmc_wait_for_req+0x70/0x100
> > >  mmc_io_rw_extended+0x1cc/0x2c0
> > >  sdio_io_rw_ext_helper+0x194/0x240
> > >  sdio_memcpy_fromio+0x20/0x2c
> > >  cw1200_sdio_memcpy_fromio+0x20/0x2c
> > >  __cw1200_reg_read+0x34/0x60
> > >  cw1200_reg_read+0x48/0x70
> > >  cw1200_load_firmware+0x38/0x5d0
> > >  cw1200_core_probe+0x794/0x970
> > >  cw1200_sdio_probe+0x124/0x22c
> > >  sdio_bus_probe+0xe8/0x1d0
> > >  really_probe+0xe4/0x504
> > >  driver_probe_device+0x64/0xcc
> > >  __device_attach_driver+0xd0/0x14c
> > >  bus_for_each_drv+0x78/0xd0
> > >  __device_attach+0xdc/0x184
> > >  device_initial_probe+0x14/0x20
> > >  bus_probe_device+0x9c/0xa4
> > >  device_add+0x350/0x83c
> > >  sdio_add_func+0x6c/0x90
> > >  mmc_attach_sdio+0x1b0/0x430
> > >  mmc_rescan+0x254/0x2e0
> > >  process_one_work+0x1d0/0x34c
> > >  worker_thread+0x13c/0x470
> > >  kthread+0x154/0x160
> > >  ret_from_fork+0x10/0x34
> > >
> > > sunxi-mmc 4021000.mmc: dma_map_sg failed
> > > sunxi-mmc 4021000.mmc: map DMA failed
> > > Can't read config register.
> > >
> > > Fix that by using kmalloc() allocated memory for read/write 16/32
> > > funtions.
> > >
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> >
> > Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
>
> Thanks! But I found few more places which need this kind of fix:
> https://github.com/jernejsk/linux-1/commit/
> 1cba9a7764c7d5bbdeb4ddeaa91ff20a0339f6ff

I couldn't find it.

>
> I guess I can keep R-b tag?

Well, just send a new version and I will respond to it again, no
worries. Or send an additional one on top.

[...]

Kind regards
Uffe