Re: [PATCH v4 5/5] MIPS: CI20: Add second percpu timer for SMP.

[Paul Cercueil]

Hi Zhou,

Le sam., juin 26 2021 at 14:18:41 +0800, 周琰杰 (Zhou Yanjie) 
<zhouyanjie@xxxxxxxxxxxxxx> a écrit :
> 1.Add a new TCU channel as the percpu timer of core1, this is to
>   prepare for the subsequent SMP support. The newly added channel
>   will not adversely affect the current single-core state.
> 2.Adjust the position of TCU node to make it consistent with the
>   order in jz4780.dtsi file.
>
> Tested-by: Nikolaus Schaller <hns@xxxxxxxxxxxxx> # on CI20
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>

Again, you should avoid moving nodes like that.

Not sure it's worth asking for a v5, so:
Acked-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Cheers,
-Paul

> ---
>
> Notes:
>     v2:
>     New patch.
>
>     v2->v3:
>     No change.
>
>     v3->v4:
>     Improve TCU related notes.
>
>  arch/mips/boot/dts/ingenic/ci20.dts | 24 ++++++++++++++----------
>  1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts 
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 3a4eaf1..61c153b 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> @@ -118,6 +118,20 @@
>  	assigned-clock-rates = <48000000>;
>  };
>
> +&tcu {
> +	/*
> +	 * 750 kHz for the system timers and clocksource,
> +	 * use channel #0 and #1 for the per cpu system timers,
> +	 * and use channel #2 for the clocksource.
> +	 *
> +	 * 3000 kHz for the OST timer to provide a higher
> +	 * precision clocksource.
> +	 */
> +	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
> +					  <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>;
> +	assigned-clock-rates = <750000>, <750000>, <750000>, <3000000>;
> +};
> +
>  &mmc0 {
>  	status = "okay";
>
> @@ -522,13 +536,3 @@
>  		bias-disable;
>  	};
>  };
> -
> -&tcu {
> -	/*
> -	 * 750 kHz for the system timer and clocksource,
> -	 * use channel #0 for the system timer, #1 for the clocksource.
> -	 */
> -	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
> -					  <&tcu TCU_CLK_OST>;
> -	assigned-clock-rates = <750000>, <750000>, <3000000>;
> -};
> --
> 2.7.4