Re: [PATCH 3/6] clk: qcom: gdsc: enable optional power domain support

From: Dmitry Baryshkov
Date: Wed Jun 30 2021 - 11:47:33 EST

Hi,

On Wed, 30 Jun 2021 at 18:00, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> On Wed 30 Jun 08:31 CDT 2021, Dmitry Baryshkov wrote:
>
> > On sm8250 dispcc and videocc registers are powered up by the MMCX power
> > domain. Currently we used a regulator to enable this domain on demand,
> > however this has some consequences, as genpd code is not reentrant.
> >
> > Teach Qualcomm clock controller code about setting up power domains and
> > using them for gdsc control.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
> There's a proposal to add a generic binding for statically assigning a
> performance states here:
>
> https://lore.kernel.org/linux-arm-msm/1622095949-2014-1-git-send-email-rnayak@xxxxxxxxxxxxxx/
>
>
> But that said, do you really need this?
>
> The requirement for driving MMCX to LOW_SVS on SM8250 (and NOM on
> SM8150/SC8180x) seems to only come from the fact that you push MDP_CLK
> to 460MHz in &mdss.
>
> But then in &mdss_mdp you do the same using an opp-table based on the
> actual MDP_CLK, which per its power-domains will scale MMCX accordingly.

MDSS and DSI would bump up MMCX performance state requirements on
their own, depending on the frequency being selected.

> So wouldn't it be sufficient to ensure that MDSS_GDSC is parented by
> MMCX and then use opp-tables associated with the devices that scales the
> clock and thereby actually carries the "required-opps".

Actually no. I set the performance state in the qcom_cc_map, so that
further register access is possible. Initially I was doing this in the
qcom_cc_really_probe() and it was already too late.
Just to remind: this patchset is not about MDSS_GDSC being parented by
MMCX, it is about dispcc/videocc registers being gated with MMCX.

> I presume your testing indicates that it doesn't matter on sm8250, but
> as stated above, 460MHz on sm8150/sc8180x requires nominal, so per your
> suggestion we'd have to vote nominal in &mdss, which means that if the
> DPU decides to go to 200MHz the &mdss will still keep the voltage at
> NOM, even though the DPU's opp-table says that LOW_SVS is sufficient.

Let me check whether LOW_SVS is really a requirement or if setting
MIN_SVS would also be sufficient for that. Interesting enough, from
the downstream drivers it looks like dispcc should be able to work
with MIN_SVS, while videocc would require LOW_SVS.

>
> Regards,
> Bjorn
>
> > ---
> > drivers/clk/qcom/common.c | 55 ++++++++++++++++++++++++++++++++++-----
> > drivers/clk/qcom/gdsc.c | 6 +++++
> > 2 files changed, 55 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> > index 60d2a78d1395..eeb5b8c93032 100644
> > --- a/drivers/clk/qcom/common.c
> > +++ b/drivers/clk/qcom/common.c
> > @@ -10,6 +10,8 @@
> > #include <linux/clk-provider.h>
> > #include <linux/reset-controller.h>
> > #include <linux/of.h>
> > +#include <linux/pm_opp.h>
> > +#include <linux/pm_runtime.h>
> >
> > #include "common.h"
> > #include "clk-rcg.h"
> > @@ -76,6 +78,16 @@ qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc)
> > struct resource *res;
> > struct device *dev = &pdev->dev;
> >
> > + if (of_find_property(dev->of_node, "required-opps", NULL)) {
> > + int pd_opp;
> > +
> > + pd_opp = of_get_required_opp_performance_state(dev->of_node, 0);
> > + if (pd_opp < 0)
> > + return ERR_PTR(pd_opp);
> > +
> > + dev_pm_genpd_set_performance_state(dev, pd_opp);
> > + }
> > +
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > base = devm_ioremap_resource(dev, res);
> > if (IS_ERR(base))
> > @@ -224,6 +236,11 @@ static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
> > return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
> > }
> >
> > +static void qcom_cc_pm_runtime_disable(void *data)
> > +{
> > + pm_runtime_disable(data);
> > +}
> > +
> > int qcom_cc_really_probe(struct platform_device *pdev,
> > const struct qcom_cc_desc *desc, struct regmap *regmap)
> > {
> > @@ -236,11 +253,28 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> > struct clk_regmap **rclks = desc->clks;
> > size_t num_clk_hws = desc->num_clk_hws;
> > struct clk_hw **clk_hws = desc->clk_hws;
> > + bool use_pm = false;
> >
> > cc = devm_kzalloc(dev, sizeof(*cc), GFP_KERNEL);
> > if (!cc)
> > return -ENOMEM;
> >
> > + if (of_find_property(dev->of_node, "required-opps", NULL)) {
> > + use_pm = true;
> > +
> > + pm_runtime_enable(dev);
> > + ret = pm_runtime_get_sync(dev);
> > + if (ret < 0) {
> > + pm_runtime_put(dev);
> > + pm_runtime_disable(dev);
> > + return ret;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, qcom_cc_pm_runtime_disable, dev);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > reset = &cc->reset;
> > reset->rcdev.of_node = dev->of_node;
> > reset->rcdev.ops = &qcom_reset_ops;
> > @@ -251,7 +285,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> >
> > ret = devm_reset_controller_register(dev, &reset->rcdev);
> > if (ret)
> > - return ret;
> > + goto err;
> >
> > if (desc->gdscs && desc->num_gdscs) {
> > scd = devm_kzalloc(dev, sizeof(*scd), GFP_KERNEL);
> > @@ -262,11 +296,11 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> > scd->num = desc->num_gdscs;
> > ret = gdsc_register(scd, &reset->rcdev, regmap);
> > if (ret)
> > - return ret;
> > + goto err;
> > ret = devm_add_action_or_reset(dev, qcom_cc_gdsc_unregister,
> > scd);
> > if (ret)
> > - return ret;
> > + goto err;
> > }
> >
> > cc->rclks = rclks;
> > @@ -277,7 +311,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> > for (i = 0; i < num_clk_hws; i++) {
> > ret = devm_clk_hw_register(dev, clk_hws[i]);
> > if (ret)
> > - return ret;
> > + goto err;
> > }
> >
> > for (i = 0; i < num_clks; i++) {
> > @@ -286,14 +320,23 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> >
> > ret = devm_clk_register_regmap(dev, rclks[i]);
> > if (ret)
> > - return ret;
> > + goto err;
> > }
> >
> > ret = devm_of_clk_add_hw_provider(dev, qcom_cc_clk_hw_get, cc);
> > if (ret)
> > - return ret;
> > + goto err;
> > +
> > + if (use_pm)
> > + pm_runtime_put(dev);
> >
> > return 0;
> > +
> > +err:
> > + if (use_pm)
> > + pm_runtime_put(dev);
> > +
> > + return ret;
> > }
> > EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
> >
> > diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
> > index 51ed640e527b..40c384bda4fc 100644
> > --- a/drivers/clk/qcom/gdsc.c
> > +++ b/drivers/clk/qcom/gdsc.c
> > @@ -11,6 +11,7 @@
> > #include <linux/kernel.h>
> > #include <linux/ktime.h>
> > #include <linux/pm_domain.h>
> > +#include <linux/pm_runtime.h>
> > #include <linux/regmap.h>
> > #include <linux/regulator/consumer.h>
> > #include <linux/reset-controller.h>
> > @@ -237,6 +238,8 @@ static int gdsc_enable(struct generic_pm_domain *domain)
> > struct gdsc *sc = domain_to_gdsc(domain);
> > int ret;
> >
> > + pm_runtime_get_sync(domain->dev.parent);
> > +
> > if (sc->pwrsts == PWRSTS_ON)
> > return gdsc_deassert_reset(sc);
> >
> > @@ -326,6 +329,8 @@ static int gdsc_disable(struct generic_pm_domain *domain)
> > if (sc->flags & CLAMP_IO)
> > gdsc_assert_clamp_io(sc);
> >
> > + pm_runtime_put(domain->dev.parent);
> > +
> > return 0;
> > }
> >
> > @@ -427,6 +432,7 @@ int gdsc_register(struct gdsc_desc *desc,
> > continue;
> > scs[i]->regmap = regmap;
> > scs[i]->rcdev = rcdev;
> > + scs[i]->pd.dev.parent = desc->dev;
> > ret = gdsc_init(scs[i]);
> > if (ret)
> > return ret;
> > --
> > 2.30.2
> >



--
With best wishes
Dmitry