Re: [PATCH V8 0/4] soc: imx: add i.MX BLK-CTL support

[Frieder Schrempf]

On 30.06.21 18:28, Marek Vasut wrote:
> On 6/30/21 4:46 PM, Frieder Schrempf wrote:
>> On 30.06.21 14:09, Adam Ford wrote:
>>> On Wed, Jun 30, 2021 at 4:34 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx> wrote:
>>>>
>>>>> Subject: Re: [PATCH V8 0/4] soc: imx: add i.MX BLK-CTL support
>>>>>
>>>>> On Tue, Jun 29, 2021 at 1:56 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx>
>>>>> wrote:
>>>>>>
>>>>>> From: Peng Fan <peng.fan@xxxxxxx>
>>>>>>
>>>>>> V8:
>>>>>> Revert one change in v7, force goto disable_clk for handshake when
>>>>>> power on in patch 3 One minor update to use if{} else {}, not if{};
>>>>>> if{}; in patch 3 Typo Hankshake->Handshake
>>>>>>
>>>>> I am using ATF, branch lf_v2.4, from the NXP code aurora repo with U-Boot
>>>>> v2021.07-rc5
>>>>>
>>>>> I applied this patch against linux-next, I applied the pgc patches [1], and the
>>>>> suggested power-domains to the otg1 and otg2 nodes.
>>>>> I am able to boot the device and use USB, but with this applied, I cannot wake
>>>>> from sleep.  If I revert this, the system wakes from sleep again.
>>>>
>>>> I just tried linux-next without this patch on iMX8MM EVK, suspend/resume
>>>> not work. Per my last test, it works before. Not sure what changed in kernel.
>>>>
>>>> Which kernel are you using, any commit or git repo? I could try on imx8mm
>>>> evk and debug the issue you see.
>>>
>>> I used kernel-next,
>>> git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
>>> commit 889bab4c367a0ef58208fd80fafa74bb6e2dca26 (tag: next-20210621)
>>>
>>> I then applied the GPCv2 patch that Marek sent.  You were CC'd on the
>>> e-mail from Marek, but I can forward the patch to you if you can't
>>> find it.
>>> I tested his patch and I was able to suspend-to-RAM and resume.
>>> Once I was comfortable that it worked, I then applied your patch
>>> series for the blk-ctl.
>>> With the blk-ctl series applied, the suspend-resume stopped working.
>>
>> Same here. I tested with linux-next-20210629 and as soon as I add the BLK-CTL driver and devicetree nodes, the resume after suspend causes a lockup each time.
> 
> btw do you have etnaviv enabled ?

yes, but I can try without and see if it's related.