[PATCH v6 7/9] cpufreq: qcom-hw: Allow getting the maximum transition latency for OPPs

[AngeloGioacchino Del Regno]

In order to fine-tune the frequency scaling from various governors,
allow to set a maximum transition latency from OPPs, which may be
different depending on the SoC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 35 +++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 54b79fe772b6..0b80c65a22a8 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -1331,6 +1331,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	void __iomem *base;
 	struct qcom_cpufreq_data *data;
 	char fdom_resname[] = "freq-domainX";
+	unsigned int transition_latency;
 	int cpu_count, index, ret;
 
 	cpu_dev = get_cpu_device(policy->cpu);
@@ -1381,22 +1382,31 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	data->soc_data = of_device_get_match_data(&pdev->dev);
 	data->base = base;
 	data->res = res;
+	policy->driver_data = data;
 
-	/* HW should be in enabled state to proceed */
-	if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
-		dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
-		ret = -ENODEV;
-		goto error;
-	}
-
-	qcom_get_related_cpus(index, policy->cpus);
+	cpu_count = qcom_get_related_cpus(index, policy->cpus);
 	if (!cpumask_weight(policy->cpus)) {
 		dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
 		ret = -ENOENT;
 		goto error;
 	}
 
-	policy->driver_data = data;
+	if (!data->soc_data->uses_tz) {
+		ret = qcom_cpufreq_hw_osm_setup(cpu_dev, policy,
+						cpu_count, index);
+		if (ret) {
+			dev_err(dev, "Cannot setup the OSM for CPU%d: %d\n",
+				policy->cpu, ret);
+			goto error;
+		}
+	}
+
+	/* HW should be in enabled state to proceed */
+	if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
+		dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
+		ret = -ENODEV;
+		goto error;
+	}
 
 	ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
 	if (ret) {
@@ -1411,6 +1421,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 		goto error;
 	}
 
+	transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
+	if (!transition_latency)
+		transition_latency = CPUFREQ_ETERNAL;
+
+	policy->cpuinfo.transition_latency = transition_latency;
+
 	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
 
 	if (policy_has_boost_freq(policy)) {
@@ -1421,6 +1437,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 
 	return 0;
 error:
+	policy->driver_data = NULL;
 	kfree(data);
 unmap_base:
 	iounmap(base);
-- 
2.32.0