Re: [PATCH] mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode

[Alan Cooper]

On Wed, Jun 30, 2021 at 10:21 AM Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Thu, 24 Jun 2021 at 18:31, Al Cooper <alcooperx@xxxxxxxxx> wrote:
> >
> > When an eMMC device is being run in HS400 mode, any access to the
> > RPMB device will cause the error message "mmc1: Invalid UHS-I mode
> > selected". This happens as a result of tuning being disabled before
> > RPMB access and then re-enabled after the RPMB access is complete.
> > When tuning is re-enabled, the system has to switch from HS400
> > to HS200 to do the tuning and then back to HS400. As part of
> > sequence to switch from HS400 to HS200 the system is temporarily
> > put into HS mode. When switching to HS mode, sdhci_get_preset_value()
> > is called and does not have support for HS mode and prints the warning
> > message and returns the preset for SDR12. The fix is to add support
> > for MMC and SD HS modes to sdhci_get_preset_value().
> >
> > This can be reproduced on any system running eMMC in HS400 mode
> > (not HS400ES) by using the "mmc" utility to run the following
> > command: "mmc rpmb read-counter /dev/mmcblk0rpmb".
> >
> > Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
>
> I assume we want this for stable kernels, but it would be nice to add
> a fixes tag as well.
>
> Do you know if there is a specific commit that this fixes?

The function sdhci_get_preset_value(), which is missing the HS modes,
was added in 52983382c74f5 for v3.9. Should I add a fixes tag for that
commit?

Thanks
Al

>
> Kind regards
> Uffe
>
> > ---
> >  drivers/mmc/host/sdhci.c | 4 ++++
> >  drivers/mmc/host/sdhci.h | 1 +
> >  2 files changed, 5 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index bf238ade1602..6b39126fbf06 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -1812,6 +1812,10 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
> >         u16 preset = 0;
> >
> >         switch (host->timing) {
> > +       case MMC_TIMING_MMC_HS:
> > +       case MMC_TIMING_SD_HS:
> > +               preset = sdhci_readw(host, SDHCI_PRESET_FOR_HIGH_SPEED);
> > +               break;
> >         case MMC_TIMING_UHS_SDR12:
> >                 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
> >                 break;
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index 0770c036e2ff..960fed78529e 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -253,6 +253,7 @@
> >
> >  /* 60-FB reserved */
> >
> > +#define SDHCI_PRESET_FOR_HIGH_SPEED    0x64
> >  #define SDHCI_PRESET_FOR_SDR12 0x66
> >  #define SDHCI_PRESET_FOR_SDR25 0x68
> >  #define SDHCI_PRESET_FOR_SDR50 0x6A
> >
> > base-commit: 7426cedc7dad67bf3c71ea6cc29ab7822e1a453f
> > --
> > 2.17.1
> >