Re: [PATCH v3 3/6] dt-bindings: media: mt9p031: Add missing required properties

[Laurent Pinchart]

Hi Stefan,

Thank you for the patch.

On Fri, Jul 02, 2021 at 11:59:19AM +0200, Stefan Riedmueller wrote:
> Add missing required clocks and supply regulator properties for the
> sensor input clock and vdd, vdd_io and vaa supply regulators.

Can I volunteer you to convert these bindings to YAML first, and add the
properties on top ? :-)

> Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
> ---
>  .../devicetree/bindings/media/i2c/mt9p031.txt        | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> index cb60443ff78f..4437d0e3147d 100644
> --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> @@ -9,6 +9,12 @@ Required Properties:
>  	(a) "aptina,mt9p031" for mt9p031 sensor
>  	(b) "aptina,mt9p031m" for mt9p031m sensor
>  
> +- clocks: Reference to the sensor input clock
> +
> +- vdd-supply: VDD supply regulator
> +- vdd_io-supply: VDD_IO supply regulator
> +- vaa-supply: VAA supply regulator
> +
>  - input-clock-frequency: Input clock frequency.
>  
>  - pixel-clock-frequency: Pixel clock frequency.
> @@ -29,6 +35,12 @@ Example:
>  			reg = <0x5d>;
>  			reset-gpios = <&gpio3 30 0>;
>  
> +			clocks = <&sensor_clk>;
> +
> +			vdd-supply = <&reg_vdd>;
> +			vdd_io-supply = <&reg_vdd_io>;
> +			vaa-supply = <&reg_vaa>;
> +
>  			port {
>  				mt9p031_1: endpoint {
>  					input-clock-frequency = <6000000>;

-- 
Regards,

Laurent Pinchart