[PATCH v1 3/6] clk: bcm2835: Switch to clk_divider.determine_rate

[Martin Blumenstingl]

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Cc: Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx>
Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
Cc: Ray Jui <rjui@xxxxxxxxxxxx>
Cc: Scott Branden <sbranden@xxxxxxxxxxxx>
Cc: bcm-kernel-feedback-list@xxxxxxxxxxxx
Cc: linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
 drivers/clk/bcm/clk-bcm2835.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 1ac803e14fa3..a254512965eb 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -805,11 +805,10 @@ static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
 	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
 }
 
-static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
-					   unsigned long rate,
-					   unsigned long *parent_rate)
+static int bcm2835_pll_divider_determine_rate(struct clk_hw *hw,
+					      struct clk_rate_request *req)
 {
-	return clk_divider_ops.round_rate(hw, rate, parent_rate);
+	return clk_divider_ops.determine_rate(hw, req);
 }
 
 static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
@@ -901,7 +900,7 @@ static const struct clk_ops bcm2835_pll_divider_clk_ops = {
 	.unprepare = bcm2835_pll_divider_off,
 	.recalc_rate = bcm2835_pll_divider_get_rate,
 	.set_rate = bcm2835_pll_divider_set_rate,
-	.round_rate = bcm2835_pll_divider_round_rate,
+	.determine_rate = bcm2835_pll_divider_determine_rate,
 	.debug_init = bcm2835_pll_divider_debug_init,
 };
 
-- 
2.32.0