[PATCH v1 2/6] clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate

[Martin Blumenstingl]

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Abel Vesa <abel.vesa@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
 drivers/clk/imx/clk-divider-gate.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/imx/clk-divider-gate.c b/drivers/clk/imx/clk-divider-gate.c
index 0322a843d245..26b210cba9be 100644
--- a/drivers/clk/imx/clk-divider-gate.c
+++ b/drivers/clk/imx/clk-divider-gate.c
@@ -64,10 +64,10 @@ static unsigned long clk_divider_gate_recalc_rate(struct clk_hw *hw,
 				   div->flags, div->width);
 }
 
-static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
-				   unsigned long *prate)
+static int clk_divider_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
 {
-	return clk_divider_ops.round_rate(hw, rate, prate);
+	return clk_divider_ops.determine_rate(hw, req);
 }
 
 static int clk_divider_gate_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -154,12 +154,12 @@ static int clk_divider_is_enabled(struct clk_hw *hw)
 
 static const struct clk_ops clk_divider_gate_ro_ops = {
 	.recalc_rate = clk_divider_gate_recalc_rate_ro,
-	.round_rate = clk_divider_round_rate,
+	.determine_rate = clk_divider_determine_rate,
 };
 
 static const struct clk_ops clk_divider_gate_ops = {
 	.recalc_rate = clk_divider_gate_recalc_rate,
-	.round_rate = clk_divider_round_rate,
+	.determine_rate = clk_divider_determine_rate,
 	.set_rate = clk_divider_gate_set_rate,
 	.enable = clk_divider_enable,
 	.disable = clk_divider_disable,
-- 
2.32.0