Re: [PATCH 1/2] igc: don't rd/wr iomem when PCI is removed
From: Pali Rohár
Date: Sun Jul 04 2021 - 10:28:25 EST
+ Bjorn, Krzysztof and linux-pci
On Friday 02 July 2021 12:51:19 Aaron Ma wrote:
> Check PCI state when rd/wr iomem.
> Implement wr32 function as rd32 too.
>
> When unplug TBT dock with i225, rd/wr PCI iomem will cause error log:
> Trace:
> BUG: unable to handle page fault for address: 000000000000b604
> Oops: 0000 [#1] SMP NOPTI
> RIP: 0010:igc_rd32+0x1c/0x90 [igc]
> Call Trace:
> igc_ptp_suspend+0x6c/0xa0 [igc]
> igc_ptp_stop+0x12/0x50 [igc]
> igc_remove+0x7f/0x1c0 [igc]
> pci_device_remove+0x3e/0xb0
> __device_release_driver+0x181/0x240
>
> Signed-off-by: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
> ---
> drivers/net/ethernet/intel/igc/igc_main.c | 16 ++++++++++++++++
> drivers/net/ethernet/intel/igc/igc_regs.h | 7 ++-----
> 2 files changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
> index f1adf154ec4a..606b72cb6193 100644
> --- a/drivers/net/ethernet/intel/igc/igc_main.c
> +++ b/drivers/net/ethernet/intel/igc/igc_main.c
> @@ -5292,6 +5292,10 @@ u32 igc_rd32(struct igc_hw *hw, u32 reg)
> u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
> u32 value = 0;
>
> + if (igc->pdev &&
> + igc->pdev->error_state == pci_channel_io_perm_failure)
Hello! This code pattern and commit message looks like that we could use
pci_dev_is_disconnected() helper function for checking if device is
still connected or was disconnected.
Apparently pci_dev_is_disconnected() is defined only in private header
file drivers/pci/pci.h and not in public include/linux/pci.h.
Aaron: can you check if pci_dev_is_disconnected() is really something
which should be used and it helps you?
Bjorn, Krzysztof: what do you think about lifting helper function
pci_dev_is_disconnected() to be available to all drivers and not only in
PCI subsystem?
I think that such helper function makes driver code more readable and
can be useful also for other drivers which are checking if return value
is all F's.
> + return 0;
Aaron: should not you return all F's on error? Because few lines below
in this function is returned value with all F's when PCIe link lost.
> +
> value = readl(&hw_addr[reg]);
Anyway, this code looks to be racy. When pci_channel_io_perm_failure is
set (e.g. by hotplug interrupt) after checking for pdev->error_state and
prior executing above readl() then mentioned fatal error still occurs.
>
> /* reads should not return all F's */
> @@ -5308,6 +5312,18 @@ u32 igc_rd32(struct igc_hw *hw, u32 reg)
> return value;
> }
>
> +void igc_wr32(struct igc_hw *hw, u32 reg, u32 val)
> +{
> + struct igc_adapter *igc = container_of(hw, struct igc_adapter, hw);
> + u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
> +
> + if (igc->pdev &&
> + igc->pdev->error_state == pci_channel_io_perm_failure)
> + return;
> +
> + writel((val), &hw_addr[(reg)]);
> +}
> +
> int igc_set_spd_dplx(struct igc_adapter *adapter, u32 spd, u8 dplx)
> {
> struct igc_mac_info *mac = &adapter->hw.mac;
> diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
> index cc174853554b..eb4be87d0e8b 100644
> --- a/drivers/net/ethernet/intel/igc/igc_regs.h
> +++ b/drivers/net/ethernet/intel/igc/igc_regs.h
> @@ -260,13 +260,10 @@ struct igc_hw;
> u32 igc_rd32(struct igc_hw *hw, u32 reg);
>
> /* write operations, indexed using DWORDS */
> -#define wr32(reg, val) \
> -do { \
> - u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \
> - writel((val), &hw_addr[(reg)]); \
> -} while (0)
> +void igc_wr32(struct igc_hw *hw, u32 reg, u32 val);
>
> #define rd32(reg) (igc_rd32(hw, reg))
> +#define wr32(reg, val) (igc_wr32(hw, reg, val))
>
> #define wrfl() ((void)rd32(IGC_STATUS))
>
> --
> 2.30.2
>