Re: [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation

[Guenter Roeck]

On 7/5/21 6:49 AM, Pavo Banicevic wrote:
> From: Luka Kovacic <luka.kovacic@xxxxxxxxxx>
>
> Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
>
> Signed-off-by: Luka Kovacic <luka.kovacic@xxxxxxxxxx>
> Signed-off-by: Pavo Banicevic <pavo.banicevic@xxxxxxxxxx>
> Cc: Luka Perkov <luka.perkov@xxxxxxxxxx>
> Cc: Robert Marko <robert.marko@xxxxxxxxxx>
> ---
>   .../hwmon/iei-wt61p803-puzzle-hwmon.rst       | 42 +++++++++++++++++++

Needs to be added to index.rst.

>   1 file changed, 42 insertions(+)
>   create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
>
> diff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
> new file mode 100644
> index 000000000000..04b01e53760c
> --- /dev/null
> +++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > @@ -0,0 +1,42 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Kernel driver iei-wt61p803-puzzle-hwmon
> +=======================================
> +
> +Supported chips:
> + * IEI WT61P803 PUZZLE for IEI Puzzle M801
> +
> +   Prefix: 'iei-wt61p803-puzzle-hwmon'
> +
> +Author: Luka Kovacic <luka.kovacic@xxxxxxxxxx>
> +
> +
> +Description
> +-----------
> +
> +This driver adds fan and temperature sensor reading for some IEI Puzzle
> +series boards.
> +
> +Sysfs attributes
> +----------------
> +
> +The following attributes are supported:
> +
> +- IEI WT61P803 PUZZLE for IEI Puzzle M801
> +
> +/sys files in hwmon subsystem
> +-----------------------------
> +
> +================= == ===================================================
> +fan[1-5]_input    RO files for fan speed (in RPM)
> +pwm[1-2]          RW files for fan[1-2] target duty cycle (0..255)

There are also temperature sensors.

> +================= == ===================================================
> +
> +/sys files in thermal subsystem
> +-------------------------------
> +
> +================= == ====================================================
> +cur_state         RW file for current cooling state of the cooling device
> +                     (0..max_state)
> +max_state         RO file for maximum cooling state of the cooling device
> +================= == ====================================================