Re: [PATCH 3/3] Documentation: hwmon: New information for DA9063

[Guenter Roeck]

On 7/5/21 5:01 PM, Vincent Pelletier wrote:
> From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
>
> Addition of HWMON documentation for the DA9063 driver.
>
> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx>
>
> Updated temperature formula, as of datasheet rev 2.3.
>
> Signed-off-by: Vincent Pelletier <plr.vincent@xxxxxxxxx>
> ---
> Originally submitted by Steve Twiss in 2014:
>    https://marc.info/?l=linux-kernel&m=139560868209856&w=2
>
>   Documentation/hwmon/da9063 | 67 ++++++++++++++++++++++++++++++++++++++

Documentation is now in .rst format.

>   1 file changed, 67 insertions(+)
>   create mode 100644 Documentation/hwmon/da9063
>
> diff --git a/Documentation/hwmon/da9063 b/Documentation/hwmon/da9063
> new file mode 100644
> index 000000000000..879f1d0fb3e4
> --- /dev/null
> +++ b/Documentation/hwmon/da9063
> @@ -0,0 +1,67 @@
> +
> +Kernel driver da9063-hwmon
> +==========================
> +
> +Supported chips:
> + * Dialog Semiconductor DA9063 PMIC
> +    Prefix: 'da9063'
> +    Datasheet:
> +	http://www.dialog-semiconductor.com/products/power-management/DA9063
> +
> +Authors: S Twiss <stwiss.opensource@xxxxxxxxxxx>
> +
> +Description
> +-----------
> +
> +The DA9063 PMIC provides a general purpose ADC with 10 bits of resolution.
> +It uses track and hold circuitry with an analogue input multiplexer which
> +allows the conversion of up to 9 different inputs.
> +
> + Channel  0: VSYS_RES	measurement of the system VDD (2.5 - 5.5V)
> + Channel  1: ADCIN1_RES	high impedance input (0 - 2.5V)
> + Channel  2: ADCIN2_RES	high impedance input (0 - 2.5V)
> + Channel  3: ADCIN3_RES	high impedance input (0 - 2.5V)
> + Channel  4: Tjunc	measurement of internal temperature sensor
> + Channel  5: VBBAT	measurement of the backup battery voltage (0 - 5.0V)
> + Channel  6: N/A	Reserved
> + Channel  7: N/A	Reserved
> + Channel  8: MON1_RES	group 1 internal regulators voltage (0 - 5.0V)
> + Channel  9: MON2_RES	group 2 internal regulators voltage (0 - 5.0V)
> + Channel 10: MON3_RES	group 3 internal regulators voltage (0 - 5.0V)
> +
> +The MUX selects from and isolates the 9 inputs and presents the channel to
> +be measured to the ADC input. When selected, an input amplifier on the VSYS
> +channel subtracts the VDDCORE reference voltage and scales the signal to the
> +correct value for the ADC.
> +
> +The analog ADC includes current sources at ADC_IN1, ADC_IN2 and ADC_IN3 to
> +support resistive measurements.
> +
> +Channels 1, 2 and 3 current source capability can be set through the ADC
> +thresholds ADC_CFG register and values for ADCIN1_CUR, ADCIN2_CUR and
> +ADCIN3_CUR. Settings for ADCIN1_CUR and ADCIN2_CUR are 1.0, 2.0, 10 and
> +40 micro Amps. The setting for ADCIN3_CUR is 10 micro Amps.
> +
> +Voltage Monitoring
> +------------------
> +
> +The manual measurement allows monitoring of the system voltage VSYS, the
> +auxiliary channels ADCIN1, ADCIN2 and ADCIN3, and a VBBAT measurement of
> +the backup battery voltage (0 - 5.0V). The manual measurements store 10
> +bits of ADC resolution.
> +
> +The manual ADC measurements attributes described above are supported by
> +the driver.
> +
> +The automatic ADC measurement is not supported by the driver.
> +
> +Temperature Monitoring
> +----------------------
> +
> +Channel 4 (Tjunc) will be used to measure the output of the internal
> +temperature sensor. The ADC measurement result and the T_OFFSET value can
> +be used by the host to calculate the internal junction temperature
> +
> +	Tjunc = -0.398 * (ADC - T_OFFSET) + 330;
> +
> +The junction temperature attribute is supported by the driver.