[PATCH v2] regulator: rt5033: Use linear ranges to map all voltage selection

[cy_huang]

From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>

Instead of linear mapping, Use linear range to map all voltage selection.

Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
---
Since v2
- recover the volt number back in rt5033-private.h
- Add the n_voltages from v1 back.

Even though commit 6549c46af855 ("regulator: rt5033: Fix n_voltages settings for BUCK and LDO")
can fix the linear mapping to the correct min/max voltage
But there're still non-step ranges for the reserved value.

To use the linear range can fix it for mapping all voltage selection.
---
 drivers/regulator/rt5033-regulator.c | 21 +++++++++++++++------
 include/linux/mfd/rt5033-private.h   |  4 ++--
 2 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c
index 0e73116..da4cf5a 100644
--- a/drivers/regulator/rt5033-regulator.c
+++ b/drivers/regulator/rt5033-regulator.c
@@ -13,6 +13,16 @@
 #include <linux/mfd/rt5033-private.h>
 #include <linux/regulator/of_regulator.h>
 
+static const struct linear_range rt5033_buck_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0, 20, 100000),
+	REGULATOR_LINEAR_RANGE(3000000, 21, 31, 0),
+};
+
+static const struct linear_range rt5033_ldo_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0, 18, 100000),
+	REGULATOR_LINEAR_RANGE(3000000, 19, 31, 0),
+};
+
 static const struct regulator_ops rt5033_safe_ldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
@@ -24,8 +34,7 @@ static const struct regulator_ops rt5033_buck_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
-	.list_voltage		= regulator_list_voltage_linear,
-	.map_voltage		= regulator_map_voltage_linear,
+	.list_voltage		= regulator_list_voltage_linear_range,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 };
@@ -40,8 +49,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
 		.type		= REGULATOR_VOLTAGE,
 		.owner		= THIS_MODULE,
 		.n_voltages	= RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM,
-		.min_uV		= RT5033_REGULATOR_BUCK_VOLTAGE_MIN,
-		.uV_step	= RT5033_REGULATOR_BUCK_VOLTAGE_STEP,
+		.linear_ranges	= rt5033_buck_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rt5033_buck_ranges),
 		.enable_reg	= RT5033_REG_CTRL,
 		.enable_mask	= RT5033_CTRL_EN_BUCK_MASK,
 		.vsel_reg	= RT5033_REG_BUCK_CTRL,
@@ -56,8 +65,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
 		.type		= REGULATOR_VOLTAGE,
 		.owner		= THIS_MODULE,
 		.n_voltages	= RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM,
-		.min_uV		= RT5033_REGULATOR_LDO_VOLTAGE_MIN,
-		.uV_step	= RT5033_REGULATOR_LDO_VOLTAGE_STEP,
+		.linear_ranges	= rt5033_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rt5033_ldo_ranges),
 		.enable_reg	= RT5033_REG_CTRL,
 		.enable_mask	= RT5033_CTRL_EN_LDO_MASK,
 		.vsel_reg	= RT5033_REG_LDO_CTRL,
diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index 40a0c2d..2d1895c 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -200,13 +200,13 @@ enum rt5033_reg {
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		21
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
 
 /* RT5033 regulator LDO output voltage uV */
 #define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		19
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
 
 /* RT5033 regulator SAFE LDO output voltage uV */
 #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U
-- 
2.7.4