Re: [PATCH] x86/PCI: Handle PIRQ routing tables with no router device given

[Nikolai Zhubr]

Hello Maciej,

05.07.2021 13:46, Maciej W. Rozycki:
> PIRQ routing tables provided by the PCI BIOS usually specify the PCI
> vendor:device ID as well as the bus address of the device implementing
> the PIRQ router, e.g.:
[...]
> linux-x86-pirq-router-nodev.diff

This one throws a panic in bus_find_device() here.
I can not yet get a good printout because scrollback does not work.
Maybe it is because of 4.14 kernel, and in order to apply it I had to 
change pci_get_domain_bus_and_slot back to pci_get_bus_and_slot.
I'll try to also test with 5.x kernel later today.


Thank you,

Regards,
Nikolai


> Index: linux-macro-ide-tty/arch/x86/pci/irq.c
> ===================================================================
> --- linux-macro-ide-tty.orig/arch/x86/pci/irq.c
> +++ linux-macro-ide-tty/arch/x86/pci/irq.c
> @@ -908,10 +908,32 @@ static struct pci_dev *pirq_router_dev;
>    *	chipset" ?
>    */
>
> +static bool __init pirq_try_router(struct irq_router *r,
> +				   struct irq_routing_table *rt,
> +				   struct pci_dev *dev)
> +{
> +	struct irq_router_handler *h;
> +
> +	DBG(KERN_DEBUG "PCI: Trying IRQ router for [%04x:%04x]\n",
> +	    dev->vendor, dev->device);
> +
> +	for (h = pirq_routers; h->vendor; h++) {
> +		/* First look for a router match */
> +		if (rt->rtr_vendor == h->vendor&&
> +		    h->probe(r, dev, rt->rtr_device))
> +			return true;
> +		/* Fall back to a device match */
> +		if (dev->vendor == h->vendor&&
> +		    h->probe(r, dev, dev->device))
> +			return true;
> +	}
> +	return false;
> +}
> +
>   static void __init pirq_find_router(struct irq_router *r)
>   {
>   	struct irq_routing_table *rt = pirq_table;
> -	struct irq_router_handler *h;
> +	struct pci_dev *dev;
>
>   #ifdef CONFIG_PCI_BIOS
>   	if (!rt->signature) {
> @@ -930,27 +952,28 @@ static void __init pirq_find_router(stru
>   	DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n",
>   	    rt->rtr_vendor, rt->rtr_device);
>
> -	pirq_router_dev = pci_get_domain_bus_and_slot(0, rt->rtr_bus,
> -						      rt->rtr_devfn);
> -	if (!pirq_router_dev) {
> -		DBG(KERN_DEBUG "PCI: Interrupt router not found at "
> -			"%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
> -		return;
> +	/* Use any vendor:device provided by the routing table or try all.  */
> +	if (rt->rtr_vendor) {
> +		dev = pci_get_domain_bus_and_slot(0, rt->rtr_bus,
> +						  rt->rtr_devfn);
> +		if (pirq_try_router(r, rt, dev))
> +			pirq_router_dev = dev;
> +	} else {
> +		for_each_pci_dev(dev) {
> +			if (pirq_try_router(r, rt, dev)) {
> +				pirq_router_dev = dev;
> +				break;
> +			}
> +		}
>   	}
>
> -	for (h = pirq_routers; h->vendor; h++) {
> -		/* First look for a router match */
> -		if (rt->rtr_vendor == h->vendor&&
> -			h->probe(r, pirq_router_dev, rt->rtr_device))
> -			break;
> -		/* Fall back to a device match */
> -		if (pirq_router_dev->vendor == h->vendor&&
> -			h->probe(r, pirq_router_dev, pirq_router_dev->device))
> -			break;
> -	}
> -	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n",
> -		 pirq_router.name,
> -		 pirq_router_dev->vendor, pirq_router_dev->device);
> +	if (pirq_router_dev)
> +		dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n",
> +			 pirq_router.name,
> +			 pirq_router_dev->vendor, pirq_router_dev->device);
> +	else
> +		DBG(KERN_DEBUG "PCI: Interrupt router not found at "
> +		    "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
>
>   	/* The device remains referenced for the kernel lifetime */
>   }