[PATCH] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module

[John Stultz]

Allow the qcom_scm driver to be loadable as a permenent module.

This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to
ensure that drivers that call into the qcom_scm driver are
also built as modules. While not ideal in some cases its the
only safe way I can find to avoid build errors without having
those drivers select QCOM_SCM and have to force it on (as
QCOM_SCM=n can be valid for those drivers).

Reviving this now that Saravana's fw_devlink defaults to on,
which should avoid loading troubles seen before.

Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Joerg Roedel <joro@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Marc Zyngier <maz@xxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
Cc: Saravana Kannan <saravanak@xxxxxxxxxx>
Cc: Todd Kjos <tkjos@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: linux-gpio@xxxxxxxxxxxxxxx
Acked-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Acked-by: Will Deacon <will@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
v3:
* Fix __arm_smccc_smc build issue reported by
  kernel test robot <lkp@xxxxxxxxx>
v4:
* Add "depends on QCOM_SCM || !QCOM_SCM" bit to ath10k
  config that requires it.
v5:
* Fix QCOM_QCM typo in Kconfig, it should be QCOM_SCM
---
 drivers/firmware/Kconfig                | 2 +-
 drivers/firmware/Makefile               | 3 ++-
 drivers/firmware/qcom_scm.c             | 4 ++++
 drivers/iommu/Kconfig                   | 2 ++
 drivers/net/wireless/ath/ath10k/Kconfig | 1 +
 5 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index db0ea2d2d75a..af53778edc7e 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -235,7 +235,7 @@ config INTEL_STRATIX10_RSU
 	  Say Y here if you want Intel RSU support.
 
 config QCOM_SCM
-	bool
+	tristate "Qcom SCM driver"
 	depends on ARM || ARM64
 	depends on HAVE_ARM_SMCCC
 	select RESET_CONTROLLER
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 5e013b6a3692..523173cbff33 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
 obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
-obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_SCM)		+= qcom-scm.o
+qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
 obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
 obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
 obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index ee9cb545e73b..bb9ce3f92931 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1296,6 +1296,7 @@ static const struct of_device_id qcom_scm_dt_match[] = {
 	{ .compatible = "qcom,scm" },
 	{}
 };
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
 
 static struct platform_driver qcom_scm_driver = {
 	.driver = {
@@ -1312,3 +1313,6 @@ static int __init qcom_scm_init(void)
 	return platform_driver_register(&qcom_scm_driver);
 }
 subsys_initcall(qcom_scm_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 07b7c25cbed8..f61516c17589 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -253,6 +253,7 @@ config SPAPR_TCE_IOMMU
 config ARM_SMMU
 	tristate "ARM Ltd. System MMU (SMMU) Support"
 	depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+	depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
 	select IOMMU_API
 	select IOMMU_IO_PGTABLE_LPAE
 	select ARM_DMA_USE_IOMMU if ARM
@@ -382,6 +383,7 @@ config QCOM_IOMMU
 	# Note: iommu drivers cannot (yet?) be built as modules
 	bool "Qualcomm IOMMU Support"
 	depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+	depends on QCOM_SCM=y
 	select IOMMU_API
 	select IOMMU_IO_PGTABLE_LPAE
 	select ARM_DMA_USE_IOMMU
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 40f91bc8514d..741289e385d5 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -44,6 +44,7 @@ config ATH10K_SNOC
 	tristate "Qualcomm ath10k SNOC support"
 	depends on ATH10K
 	depends on ARCH_QCOM || COMPILE_TEST
+	depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
 	select QCOM_QMI_HELPERS
 	help
 	  This module adds support for integrated WCN3990 chip connected
-- 
2.25.1