[PATCH v7 5/5] arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada

[kostap]

From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>

Change all 10G port modes in Armada family device trees from
10gbase-kr to 10gbase-r

Signed-off-by: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
Suggested-by: Russell King <linux@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 +-
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 4 ++--
 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi    | 2 +-
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi     | 2 +-
 arch/arm64/boot/dts/marvell/cn9131-db.dtsi     | 2 +-
 arch/arm64/boot/dts/marvell/cn9132-db.dtsi     | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 51f3e2907597..cd326fe224ce 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -282,7 +282,7 @@
 &cp0_eth0 {
 	status = "okay";
 	/* Network PHY */
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp0_comphy2 0>;
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index e39e1efc95b6..f2e8e0df8865 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -195,7 +195,7 @@
 
 &cp0_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 
 	fixed-link {
 		speed = <10000>;
@@ -348,7 +348,7 @@
 
 &cp1_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 
 	fixed-link {
 		speed = <10000>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 75933477324a..9f0efcdacdf1 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -202,7 +202,7 @@
 &cp0_eth0 {
 	/* This port is connected to 88E6393X switch */
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	managed = "in-band-status";
 	phys = <&cp0_comphy4 0>;
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 39fc90716454..2cd4bb09e8ff 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -126,7 +126,7 @@
 /* SLM-1521-V2, CON9 */
 &cp0_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp0_comphy4 0>;
 	managed = "in-band-status";
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index daddab638fb8..f995b1bcda01 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -85,7 +85,7 @@
 /* CON50 */
 &cp1_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp1_comphy4 0>;
 	managed = "in-band-status";
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 5948de6b4638..3f1795fb4fe7 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -103,7 +103,7 @@
 /* SLM-1521-V2, CON9 */
 &cp2_eth0 {
 	status = "disabled";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp2_comphy4 0>;
 	managed = "in-band-status";
-- 
2.17.1