RE: [PATCH v1 3/4] iio: adc: ad7949: add support for internal vref

[Sa, Nuno]

> From: Liam Beguin <liambeguin@xxxxxxxxx>
> Sent: Friday, July 9, 2021 1:56 AM
> To: liambeguin@xxxxxxxxx; lars@xxxxxxxxxx; Hennerich, Michael
> <Michael.Hennerich@xxxxxxxxxx>; jic23@xxxxxxxxxx; charles-
> antoine.couret@xxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx
> Subject: [PATCH v1 3/4] iio: adc: ad7949: add support for internal vref
> 
> [External]
> 
> From: Liam Beguin <lvb@xxxxxxxxxx>
> 
> Add support for selecting a custom reference voltage from the
> devicetree. If an external source is used, a vref regulator should be
> defined in the devicetree.
> 
> Signed-off-by: Liam Beguin <lvb@xxxxxxxxxx>
> ---
>  drivers/iio/adc/ad7949.c | 84
> +++++++++++++++++++++++++++++++++-------
>  1 file changed, 69 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
> index bbc6b56330a3..3c1293922d2e 100644
> --- a/drivers/iio/adc/ad7949.c
> +++ b/drivers/iio/adc/ad7949.c
> @@ -31,6 +31,7 @@
>  #define AD7949_CFG_VAL_BW_FULL			1
>  #define AD7949_CFG_VAL_BW_QUARTER		0
>  #define AD7949_CFG_BIT_REF		GENMASK(5, 3)
> +#define AD7949_CFG_VAL_REF_EXTERNAL		BIT(1)
>  #define AD7949_CFG_BIT_SEQ		GENMASK(2, 1)
>  #define AD7949_CFG_BIT_RBN		BIT(0)
> 
> @@ -40,6 +41,33 @@ enum {
>  	ID_AD7689,
>  };
> 
> +/**
> + * enum ad7949_ref - Reference selection
> + *
> + * AD7949_REF_INT_2500:     Internal reference and temperature
> sensor enabled.
> + *                          Vref=2.5V, buffered output
> + * AD7949_REF_INT_4096:     Internal reference and temperature
> sensor enabled.
> + *                          Vref=4.096V, buffered output
> + * AD7949_REF_EXT_TEMP:     Use external reference, temperature
> sensor enabled.
> + *                          Internal buffer disabled
> + * AD7949_REF_EXT_TEMP_BUF: Use external reference, internal
> buffer and
> + *                          temperature sensor enabled.
> + * AD7949_REF_RSRV_4:       Do not use
> + * AD7949_REF_RSRV_5:       Do not use
> + * AD7949_REF_EXT:          Use external reference, internal buffer and
> + *                          temperature sensor disabled.
> + * AD7949_REF_EXT_BUF:      Use external reference, internal buffer
> enabled.
> + *                          Internal reference and temperature sensor disabled.
> + */
> +enum ad7949_ref {
> +	AD7949_REF_INT_2500 = 0,
> +	AD7949_REF_INT_4096,
> +	AD7949_REF_EXT_TEMP,
> +	AD7949_REF_EXT_TEMP_BUF,
> +	AD7949_REF_EXT = 6,
> +	AD7949_REF_EXT_BUF,
> +};
> +
>  struct ad7949_adc_spec {
>  	u8 num_channels;
>  	u8 resolution;
> @@ -55,6 +83,7 @@ static const struct ad7949_adc_spec
> ad7949_adc_spec[] = {
>   * struct ad7949_adc_chip - AD ADC chip
>   * @lock: protects write sequences
>   * @vref: regulator generating Vref
> + * @refsel: reference selection
>   * @indio_dev: reference to iio structure
>   * @spi: reference to spi structure
>   * @resolution: resolution of the chip
> @@ -66,6 +95,7 @@ static const struct ad7949_adc_spec
> ad7949_adc_spec[] = {
>  struct ad7949_adc_chip {
>  	struct mutex lock;
>  	struct regulator *vref;
> +	enum ad7949_ref refsel;
>  	struct iio_dev *indio_dev;
>  	struct spi_device *spi;
>  	u8 resolution;
> @@ -241,12 +271,28 @@ static int ad7949_spi_read_raw(struct iio_dev
> *indio_dev,
>  		return IIO_VAL_INT;
> 
>  	case IIO_CHAN_INFO_SCALE:
> -		ret = regulator_get_voltage(ad7949_adc->vref);
> -		if (ret < 0)
> -			return ret;
> +		switch (ad7949_adc->refsel) {
> +		case AD7949_REF_INT_2500:
> +			*val = 2500;
> +			break;
> +		case AD7949_REF_INT_4096:
> +			*val = 4096;
> +			break;
> +		case AD7949_REF_EXT_TEMP:
> +		case AD7949_REF_EXT_TEMP_BUF:
> +		case AD7949_REF_EXT:
> +		case AD7949_REF_EXT_BUF:
> +			ret = regulator_get_voltage(ad7949_adc-
> >vref);
> +			if (ret < 0)
> +				return ret;
> +
> +			/* convert value back to mV */
> +			*val = ret / 1000;
> +			break;
> +		}
> 
> -		*val = ret / 5000;
> -		return IIO_VAL_INT;
> +		*val2 = (1 << ad7949_adc->resolution) - 1;
> +		return IIO_VAL_FRACTIONAL;
>  	}
> 
>  	return -EINVAL;
> @@ -285,7 +331,7 @@ static int ad7949_spi_init(struct
> ad7949_adc_chip *ad7949_adc)
>  		FIELD_PREP(AD7949_CFG_BIT_INCC,
> AD7949_CFG_VAL_INCC_UNIPOLAR_GND) |
>  		FIELD_PREP(AD7949_CFG_BIT_INX, ad7949_adc-
> >current_channel) |
>  		FIELD_PREP(AD7949_CFG_BIT_BW,
> AD7949_CFG_VAL_BW_FULL) |
> -		FIELD_PREP(AD7949_CFG_BIT_REF,
> AD7949_REF_EXT_BUF) |
> +		FIELD_PREP(AD7949_CFG_BIT_REF, ad7949_adc-
> >refsel) |
>  		FIELD_PREP(AD7949_CFG_BIT_SEQ, 0x0) |
>  		FIELD_PREP(AD7949_CFG_BIT_RBN, 1);
> 
> @@ -304,6 +350,7 @@ static int ad7949_spi_init(struct
> ad7949_adc_chip *ad7949_adc)
>  static int ad7949_spi_probe(struct spi_device *spi)
>  {
>  	struct device *dev = &spi->dev;
> +	struct device_node *np = dev->of_node;
>  	const struct ad7949_adc_spec *spec;
>  	struct ad7949_adc_chip *ad7949_adc;
>  	struct iio_dev *indio_dev;
> @@ -315,6 +362,7 @@ static int ad7949_spi_probe(struct spi_device
> *spi)
>  		return -ENOMEM;
>  	}
> 
> +	indio_dev->dev.of_node = np;

Why doing this? The IIO core will do it for us at register time.

>  	indio_dev->info = &ad7949_spi_info;
>  	indio_dev->name = spi_get_device_id(spi)->name;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
> @@ -330,16 +378,22 @@ static int ad7949_spi_probe(struct spi_device
> *spi)
>  	ad7949_adc->resolution = spec->resolution;
>  	ad7949_set_bits_per_word(ad7949_adc);
> 
> -	ad7949_adc->vref = devm_regulator_get(dev, "vref");
> -	if (IS_ERR(ad7949_adc->vref)) {
> -		dev_err(dev, "fail to request regulator\n");
> -		return PTR_ERR(ad7949_adc->vref);
> -	}
> +	/* Set default devicetree parameters */
> +	ad7949_adc->refsel = AD7949_REF_EXT_BUF;
> +	of_property_read_u32(np, "adi,reference-select",
> &ad7949_adc->refsel);

In case the property is given, we should make sure we get a valid
value and error out if not...

- Nuno Sá
> -	ret = regulator_enable(ad7949_adc->vref);
> -	if (ret < 0) {
> -		dev_err(dev, "fail to enable regulator\n");
> -		return ret;
> +	if (ad7949_adc->refsel & AD7949_CFG_VAL_REF_EXTERNAL) {
> +		ad7949_adc->vref = devm_regulator_get(dev, "vref");
> +		if (IS_ERR(ad7949_adc->vref)) {
> +			dev_err(dev, "fail to request regulator\n");
> +			return PTR_ERR(ad7949_adc->vref);
> +		}
> +
> +		ret = regulator_enable(ad7949_adc->vref);
> +		if (ret < 0) {
> +			dev_err(dev, "fail to enable regulator\n");
> +			return ret;
> +		}
>  	}
> 
>  	mutex_init(&ad7949_adc->lock);
> --
> 2.30.1.489.g328c10930387