Re: [PATCH 2/2] mfd: atmel-flexcom: use resume_noirq

[Nicolas Ferre]

On 05/07/2021 at 13:31, Claudiu Beznea wrote:
> Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
> mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
> be connected critical devices (like PMIC) which on suspend/resume should
> be suspended/resumed at the end/beginning. i2c uses
> .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
> to use .resume_noirq as it should be resumed before the embedded IPs.
> Otherwise the embedded devices might behave badly.
>
> Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

Thanks Claudiu, best regards,
  Nicolas

> ---
>   drivers/mfd/atmel-flexcom.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
> index 962f66dc8813..559eb4d352b6 100644
> --- a/drivers/mfd/atmel-flexcom.c
> +++ b/drivers/mfd/atmel-flexcom.c
> @@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
>   };
>   MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
>   
> -static int __maybe_unused atmel_flexcom_resume(struct device *dev)
> +static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev)
>   {
>   	struct atmel_flexcom *ddata = dev_get_drvdata(dev);
>   	int err;
> @@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev)
>   	return 0;
>   }
>   
> -static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
> -			 atmel_flexcom_resume);
> +static const struct dev_pm_ops atmel_flexcom_pm_ops = {
> +	.resume_noirq = atmel_flexcom_resume_noirq,
> +};
>   
>   static struct platform_driver atmel_flexcom_driver = {
>   	.probe	= atmel_flexcom_probe,


--
Nicolas Ferre