Re: [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver

[Dmitry Baryshkov]

On Fri, 9 Jul 2021 at 13:41, Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx> wrote:
>
> Add safe lut configuration for all the targets in dpu
> driver as per QOS recommendation.
>
> Issue reported on SC7280:
>
> With wait-for-safe feature in smmu enabled, RT client
> buffer levels are checked to be safe before smmu invalidation.
> Since display was always set to unsafe it was delaying the
> invalidaiton process thus impacting the performance on NRT clients
> such as eMMC and NVMe.
>
> Validated this change on SC7280, With this change eMMC performance
> has improved significantly.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

It might be a good option to push it to the stable tree also.

>
> Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index d01c4c9..2e482cd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data = {
>         .amortizable_threshold = 25,
>         .min_prefill_lines = 24,
>         .danger_lut_tbl = {0xf, 0xffff, 0x0},
> +       .safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
>         .qos_lut_tbl = {
>                 {.nentry = ARRAY_SIZE(sdm845_qos_linear),
>                 .entries = sdm845_qos_linear
> @@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data = {
>         .min_dram_ib = 1600000,
>         .min_prefill_lines = 24,
>         .danger_lut_tbl = {0xff, 0xffff, 0x0},
> +       .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
>         .qos_lut_tbl = {
>                 {.nentry = ARRAY_SIZE(sc7180_qos_linear),
>                 .entries = sc7180_qos_linear
> @@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
>         .min_dram_ib = 800000,
>         .min_prefill_lines = 24,
>         .danger_lut_tbl = {0xf, 0xffff, 0x0},
> +       .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
>         .qos_lut_tbl = {
>                 {.nentry = ARRAY_SIZE(sm8150_qos_linear),
>                 .entries = sm8150_qos_linear
> @@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data = {
>         .min_dram_ib = 800000,
>         .min_prefill_lines = 35,
>         .danger_lut_tbl = {0xf, 0xffff, 0x0},
> +       .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
>         .qos_lut_tbl = {
>                 {.nentry = ARRAY_SIZE(sc7180_qos_linear),
>                 .entries = sc7180_qos_linear
> @@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
>         .min_dram_ib = 1600000,
>         .min_prefill_lines = 24,
>         .danger_lut_tbl = {0xffff, 0xffff, 0x0},
> +       .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
>         .qos_lut_tbl = {
>                 {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
>                 .entries = sc7180_qos_macrotile
> --
> 2.7.4
>


-- 
With best wishes
Dmitry