[PATCH AUTOSEL 5.12 079/104] s390/ipl_parm: fix program check new psw handling

[Sasha Levin]

From: Heiko Carstens <hca@xxxxxxxxxxxxx>

[ Upstream commit 88c2510cecb7e2b518e3c4fdf3cf0e13ebe9377c ]

The __diag308() inline asm temporarily changes the program check new
psw to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.

This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.

To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.

Signed-off-by: Heiko Carstens <hca@xxxxxxxxxxxxx>
Signed-off-by: Vasily Gorbik <gor@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/s390/boot/ipl_parm.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c
index d372a45fe10e..dd92092e3eec 100644
--- a/arch/s390/boot/ipl_parm.c
+++ b/arch/s390/boot/ipl_parm.c
@@ -28,22 +28,25 @@ static inline int __diag308(unsigned long subcode, void *addr)
 	register unsigned long _addr asm("0") = (unsigned long)addr;
 	register unsigned long _rc asm("1") = 0;
 	unsigned long reg1, reg2;
-	psw_t old = S390_lowcore.program_new_psw;
+	psw_t old;
 
 	asm volatile(
+		"	mvc	0(16,%[psw_old]),0(%[psw_pgm])\n"
 		"	epsw	%0,%1\n"
-		"	st	%0,%[psw_pgm]\n"
-		"	st	%1,%[psw_pgm]+4\n"
+		"	st	%0,0(%[psw_pgm])\n"
+		"	st	%1,4(%[psw_pgm])\n"
 		"	larl	%0,1f\n"
-		"	stg	%0,%[psw_pgm]+8\n"
+		"	stg	%0,8(%[psw_pgm])\n"
 		"	diag	%[addr],%[subcode],0x308\n"
-		"1:	nopr	%%r7\n"
+		"1:	mvc	0(16,%[psw_pgm]),0(%[psw_old])\n"
 		: "=&d" (reg1), "=&a" (reg2),
-		  [psw_pgm] "=Q" (S390_lowcore.program_new_psw),
+		  "+Q" (S390_lowcore.program_new_psw),
+		  "=Q" (old),
 		  [addr] "+d" (_addr), "+d" (_rc)
-		: [subcode] "d" (subcode)
+		: [subcode] "d" (subcode),
+		  [psw_old] "a" (&old),
+		  [psw_pgm] "a" (&S390_lowcore.program_new_psw)
 		: "cc", "memory");
-	S390_lowcore.program_new_psw = old;
 	return _rc;
 }
 
-- 
2.30.2