Re: [PATCH AUTOSEL 5.13 013/114] serial: 8250: of: Check for CONFIG_SERIAL_8250_BCM7271

[Florian Fainelli]

On 7/9/2021 7:16 PM, Sasha Levin wrote:
> From: Jim Quinlan <jim2101024@xxxxxxxxx>
>
> [ Upstream commit f5b08386dee439c7a9e60ce0a4a4a705f3a60dff ]
>
> Our SoC's have always had a NS16650A UART core and older SoC's would
> have a compatible string of: 'compatible = ""ns16550a"' and use the
> 8250_of driver. Our newer SoC's have added enhancements to the base
> core to add support for DMA and accurate high speed baud rates and use
> this newer 8250_bcm7271 driver. The Device Tree node for our enhanced
> UARTs has a compatible string of: 'compatible = "brcm,bcm7271-uart",
> "ns16550a"''. With both drivers running and the link order setup so
> that the 8250_bcm7217 driver is initialized before the 8250_of driver,
> we should bind the 8250_bcm7271 driver to the enhanced UART, or for
> upstream kernels that don't have the 8250_bcm7271 driver, we bind to
> the 8250_of driver.
>
> The problem is that when both the 8250_of and 8250_bcm7271 drivers
> were running, occasionally the 8250_of driver would be bound to the
> enhanced UART instead of the 8250_bcm7271 driver. This was happening
> because we use SCMI based clocks which come up late in initialization
> and cause probe DEFER's when the two drivers get their clocks.
>
> Occasionally the SCMI clock would become ready between the 8250_bcm7271
> probe and the 8250_of probe and the 8250_of driver would be bound. To
> fix this we decided to config only our 8250_bcm7271 driver and added
> "ns16665a0" to the compatible string so the driver would work on our
> older system.
>
> This commit has of_platform_serial_probe() check specifically for the
> "brcm,bcm7271-uart" and whether its companion driver is enabled. If it
> is the case, and the clock provider is not ready, we want to make sure
> that when the 8250_bcm7271.c driver returns EPROBE_DEFER, we are not
> getting the UART registered via 8250_of.c.
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> Link: https://lore.kernel.org/r/20210423183206.3917725-1-f.fainelli@xxxxxxxxx
> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

This commit is only relevant with 
41a469482de257ea8db43cf74b6311bd055de030 ("serial: 8250: Add new 
8250-core based Broadcom STB driver") which is included in v5.13 and 
newer. You would want to drop that commit from the 5.12, 5.10 and 5.4 
auto-selection.

Thanks!
--
Florian