[PATCH 5.10 552/593] serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs

[Greg Kroah-Hartman]

From: Vignesh Raghavendra <vigneshr@xxxxxx>

[ Upstream commit b67e830d38fa9335d927fe67e812e3ed81b4689c ]

On K3 family of SoCs (which includes AM654 SoC), it is observed that RX
TIMEOUT is signalled after RX FIFO has been drained, in which case a
dummy read of RX FIFO is required to clear RX TIMEOUT condition.
Otherwise, this would lead to an interrupt storm.

Fix this by introducing UART_RX_TIMEOUT_QUIRK flag and doing a dummy
read in IRQ handler when RX TIMEOUT is reported with no data in RX FIFO.

Fixes: be70874498f3 ("serial: 8250_omap: Add support for AM654 UART controller")
Reported-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Tested-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Link: https://lore.kernel.org/r/20210622145704.11168-1-vigneshr@xxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_omap.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index a9cfe1c57642..95e2d6de4f21 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -43,6 +43,7 @@
 #define UART_ERRATA_CLOCK_DISABLE	(1 << 3)
 #define	UART_HAS_EFR2			BIT(4)
 #define UART_HAS_RHR_IT_DIS		BIT(5)
+#define UART_RX_TIMEOUT_QUIRK		BIT(6)
 
 #define OMAP_UART_FCR_RX_TRIG		6
 #define OMAP_UART_FCR_TX_TRIG		4
@@ -104,6 +105,9 @@
 #define UART_OMAP_EFR2			0x23
 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE	BIT(6)
 
+/* RX FIFO occupancy indicator */
+#define UART_OMAP_RX_LVL		0x64
+
 struct omap8250_priv {
 	int line;
 	u8 habit;
@@ -598,6 +602,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port);
 static irqreturn_t omap8250_irq(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
+	struct omap8250_priv *priv = port->private_data;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned int iir;
 	int ret;
@@ -612,6 +617,18 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 	serial8250_rpm_get(up);
 	iir = serial_port_in(port, UART_IIR);
 	ret = serial8250_handle_irq(port, iir);
+
+	/*
+	 * On K3 SoCs, it is observed that RX TIMEOUT is signalled after
+	 * FIFO has been drained, in which case a dummy read of RX FIFO
+	 * is required to clear RX TIMEOUT condition.
+	 */
+	if (priv->habit & UART_RX_TIMEOUT_QUIRK &&
+	    (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT &&
+	    serial_port_in(port, UART_OMAP_RX_LVL) == 0) {
+		serial_port_in(port, UART_RX);
+	}
+
 	serial8250_rpm_put(up);
 
 	return IRQ_RETVAL(ret);
@@ -1210,7 +1227,8 @@ static struct omap8250_dma_params am33xx_dma = {
 
 static struct omap8250_platdata am654_platdata = {
 	.dma_params	= &am654_dma,
-	.habit		= UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS,
+	.habit		= UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS |
+			  UART_RX_TIMEOUT_QUIRK,
 };
 
 static struct omap8250_platdata am33xx_platdata = {
-- 
2.30.2