[PATCH 5.13 106/800] rsi: Assign beacon rate settings to the correct rate_info descriptor field

[Greg Kroah-Hartman]

From: Marek Vasut <marex@xxxxxxx>

commit b1c3a24897bd528f2f4fda9fea7da08a84ae25b6 upstream.

The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info
field. The rest of the driver does it correctly, except this one place,
so fix it. This is also aligned with the RSI downstream vendor driver.
Without this patch, an AP operating at 5 GHz does not transmit any
beacons at all, this patch fixes that.

Fixes: d26a9559403c ("rsi: add beacon changes for AP mode")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Amitkumar Karwar <amit.karwar@xxxxxxxxxxxxxxxxxx>
Cc: Angus Ainslie <angus@xxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: Karun Eagalapati <karun256@xxxxxxxxx>
Cc: Martin Kepplinger <martink@xxxxxxxxx>
Cc: Prameela Rani Garnepudi <prameela.j04cs@xxxxxxxxx>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
Cc: Siva Rebbagondla <siva8118@xxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210507213105.140138-1-marex@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/wireless/rsi/rsi_91x_hal.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -470,9 +470,9 @@ int rsi_prepare_beacon(struct rsi_common
 	}
 
 	if (common->band == NL80211_BAND_2GHZ)
-		bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_1);
+		bcn_frm->rate_info |= cpu_to_le16(RSI_RATE_1);
 	else
-		bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_6);
+		bcn_frm->rate_info |= cpu_to_le16(RSI_RATE_6);
 
 	if (mac_bcn->data[tim_offset + 2] == 0)
 		bcn_frm->frame_info |= cpu_to_le16(RSI_DATA_DESC_DTIM_BEACON);