On Fri, Jul 09, 2021 at 02:55:35PM -0700, Jim Mattson wrote:
On Fri, Jul 9, 2021 at 2:51 AM Yang Weijiang <weijiang.yang@xxxxxxxxx> wrote:Yes, should be preserved.
From: Like Xu <like.xu@xxxxxxxxxxxxxxx>
Arch LBRs are enabled by setting MSR_ARCH_LBR_CTL.LBREn to 1. A new guest
state field named "Guest IA32_LBR_CTL" is added to enhance guest LBR usage.
When guest Arch LBR is enabled, a guest LBR event will be created like the
model-specific LBR does. Clear guest LBR enable bit on host PMI handling so
guest can see expected config.
On processors that support Arch LBR, MSR_IA32_DEBUGCTLMSR[bit 0] has no
meaning. It can be written to 0 or 1, but reads will always return 0.
Like IA32_DEBUGCTL, IA32_ARCH_LBR_CTL msr is also reserved on INIT.
I suspect you mean "preserved" rather than "reserved."
Agree, will put this in commit message.
Signed-off-by: Like Xu <like.xu@xxxxxxxxxxxxxxx>
Signed-off-by: Yang Weijiang <weijiang.yang@xxxxxxxxx>
---
arch/x86/events/intel/lbr.c | 2 --
arch/x86/include/asm/msr-index.h | 1 +
arch/x86/include/asm/vmx.h | 2 ++
arch/x86/kvm/vmx/pmu_intel.c | 31 ++++++++++++++++++++++++++-----
arch/x86/kvm/vmx/vmx.c | 9 +++++++++
5 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index da68f0e74702..4500c564c63a 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -19,6 +19,11 @@
#include "pmu.h"
#define MSR_PMC_FULL_WIDTH_BIT (MSR_IA32_PMC0 - MSR_IA32_PERFCTR0)
+/*
+ * Regardless of the Arch LBR or legacy LBR, when the LBR_EN bit 0 of the
+ * corresponding control MSR is set to 1, LBR recording will be enabled.
+ */
Is this comment misplaced? It doesn't seem to have anything to do with
the macro being defined below.
Yes, more sanity checks are required, thanks!
@@ -458,6 +467,14 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
lbr_desc->records.nr = data;
lbr_desc->arch_lbr_reset = true;
return 0;
+ case MSR_ARCH_LBR_CTL:
+ if (data & ~KVM_ARCH_LBR_CTL_MASK)
Is a static mask sufficient? Per the Intel® Architecture Instruction
Set Extensions and Future Features Programming Reference, some of
these bits may not be supported on all microarchitectures. See Table
7-8. CPUID Leaf 01CH Enumeration of Architectural LBR Capabilities.
Need to release the event and reset related flag when the bit goes from
+ break;
+ vmcs_write64(GUEST_IA32_LBR_CTL, data);
+ if (intel_pmu_lbr_is_enabled(vcpu) && !lbr_desc->event &&
+ (data & ARCH_LBR_CTL_LBREN))
+ intel_pmu_create_guest_lbr_event(vcpu);
Nothing has to be done when the LBREN bit goes from 1 to 0?
1 to 0. Thanks!
+ return 0;
default:
if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0)) ||
(pmc = get_gp_pmc(pmu, msr, MSR_IA32_PMC0))) {
Per the Intel® Architecture Instruction Set Extensions and Future
Features Programming Reference, "IA32_LBR_CTL.LBREn is saved and
cleared on #SMI, and restored on RSM." I don't see that happening
anywhere. That manual also says, "On a warm reset...IA32_LBR_CTL.LBREn
is cleared to 0, disabling LBRs." I don't see that happening either.
Yes, I'll add related code to make it consistent with spec, thanks!
OK, I don't have answer now, will ask the Arch to get clear answer on this,
I have a question about section 7.1.4.4 in that manual. It says, "On a
debug breakpoint event (#DB), IA32_LBR_CTL.LBREn is cleared." When,
exactly, does that happen? In particular, if kvm synthesizes such an
event (for example, in kvm_vcpu_do_singlestep), does
IA32_LBR_CTL.LBREn automatically get cleared (after loading the guest
IA32_LBR_CTL value from the VMCS)? Or does kvm need to explicitly
clear that bit in the VMCS before injecting the #DB?
thanks for raising the question!