Re: [syzbot] WARNING in do_proc_control/usb_submit_urb

From: Alan Stern
Date: Mon Jul 12 2021 - 10:00:09 EST


On Sun, Jul 11, 2021 at 09:07:09AM -0700, syzbot wrote:
> Hello,
>
> syzbot has tested the proposed patch but the reproducer is still triggering an issue:
> WARNING in do_proc_control/usb_submit_urb
>
> ------------[ cut here ]------------
> usb usb2: BOGUS control dir, pipe 80000180 doesn't match bRequestType 80
> WARNING: CPU: 0 PID: 10164 at drivers/usb/core/urb.c:410 usb_submit_urb+0x149d/0x18a0 drivers/usb/core/urb.c:410
> Modules linked in:
> CPU: 1 PID: 10164 Comm: syz-executor.2 Tainted: G W 5.13.0-next-20210707-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> RIP: 0010:usb_submit_urb+0x149d/0x18a0 drivers/usb/core/urb.c:410
> Code: 7c 24 40 e8 45 1e 20 fc 48 8b 7c 24 40 e8 6b 40 0c ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 99 27 8a e8 5a a4 91 03 <0f> 0b e9 a5 ee ff ff e8 17 1e 20 fc 0f b6 1d 21 86 02 08 31 ff 41
> RSP: 0018:ffffc9000a33f9a8 EFLAGS: 00010286
> RAX: 0000000000000000 RBX: ffff8881468f1058 RCX: 0000000000000000
> RDX: ffff88802a830000 RSI: ffffffff815d7735 RDI: fffff52001467f27
> RBP: ffff888142fe0578 R08: 0000000000000000 R09: 0000000000000000
> R10: ffffffff815d156e R11: 0000000000000000 R12: ffff888146811500
> R13: 0000000000000080 R14: 0000000080000180 R15: ffff8880135f2700
> FS: 00007f1b9bc83700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007ffcfa7f3720 CR3: 000000003de67000 CR4: 00000000001506e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
> usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
> usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
> do_proc_control+0x6c4/0x920 drivers/usb/core/devio.c:1141
> proc_control drivers/usb/core/devio.c:1191 [inline]
> usbdev_do_ioctl drivers/usb/core/devio.c:2540 [inline]
> usbdev_ioctl+0x10e2/0x36c0 drivers/usb/core/devio.c:2713

I don't get this. It shouldn't be possible. The fact that the
direction bit is set in both bRequestType and pipe means that the URB
was submitted as a control-IN but had length 0. But the patch addresses
exactly that case:

--- usb-devel.orig/drivers/usb/core/devio.c
+++ usb-devel/drivers/usb/core/devio.c
@@ -1133,7 +1133,7 @@ static int do_proc_control(struct usb_de
"wIndex=%04x wLength=%04x\n",
ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
ctrl->wIndex, ctrl->wLength);
- if (ctrl->bRequestType & 0x80) {
+ if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
pipe = usb_rcvctrlpipe(dev, 0);
snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);

and causes the kernel to handle it as a control-OUT instead.

Johan, any ideas?

Alan Stern